For The Love Of God Help!!!

so my grow was going great until....the FPL transformer blew outside my window. so now i'm left with 3 hrs. of no power and now they are droopy and very yellow...FOR THE LOVE OF GOD CAN THEY BE RECOVERED?

I think so. They don't look that bad to me. Give them a couple days.

sorry i didn't mention that they are 12 days old now I haven't started any nutes. and the room went from 72 degrees to 85 and got really humid around 85 90...its my boyfriend and I 's first grow and now were kinda stumped on what to do we have been reading on here as much as we can but any help any suggestions on starting nutes???any help would be greatly appreciated...thank u

what are you setting the pH at? Those rust spots are a sign of a mag deficiency I think, are you using cal/mag?

usually at 6.0 but it was at 6.2 today....do you think the lights could have gotten to hot? I have 2 fans on them they are about 2-3 inches away from the plants......

i havent used anything on them yet just distilled water...

should i start my nutes???

yes, start nutes at 1/4 strength. I use foxfarm nutes if your curious.

ok i will try that asap thank you soooo much!
do you think that would help them perk back up???

thats why u should grow organically, hydro sucks. but just if the bottom leaves keep yellowing just clip em, cus the other ones will grow still.

we would like to try growing both ways soil and hydro we just wanted to try and compare the too but were trying the hydro first and we just hit a bump in the road when the power messed up today and i hope we can get to the problem in time when we find out what the problem is exactly...lol.. it had a couple bad spots on the leaves b4 this but not that bad...thanx 4 the advice!

yea its ok =) nice plants though peace

so I have been using distilled water the hole time i have had my plants( 2 weeks )
and i was wondering if it would be ok to use well water if i boiled it?????
my well hasent been tested since i have lived here and i plan on going to get it tested but until the would it be alright???
any suggestions thanx

You will be fine, just keep the lights on them and the water Ph to around 5.8. up or down a few points will not make a huge diff unless your strain is supper sensitive. Dont clip any leaves, you will see when they are ready to fall off, then just remove and discard them.

The hydro is alittle tricky at first but you will soon find that it is well worth the effort in quality and yeild, plus they finish faster.
Pay attention to your plants but do not over mother them. They are weeds, they can live thru alot.

That hydroton looks pretty bright, did you wash the pellets off first before using?

Ok thank you ..so far i have been watering once a day because peet pellets seem to stay pretty wet they were just put in the system with clay pellets and net pots but i had ran out of distilled water i do havea a ph tester so i will go and check the ph in the well water and start my system thanx lot...oh and yes we washed and soaked the clay pellets pretty good..

Ok so im starting to to be told a lot of bad stuff about peat pellets...has anyone had any bad luck with them???? I have been using them for my 25 day old plants and i have been reading a lot of horror stories about them...are their any good stories about them anywhere???....im starting to worry

i have used peat pellets and they work. They do have some down falls that you will not get with rockwool, but they still work. You will get alot of salt and algea build up with pellets.

BTW, you should test your water AFTER you put the nutes in it.Nutes are ph balanced and will change the Ph of your local water.

Hopefully i don't have to many problems with them and i will try rock wool next time but also the closest store that has them is an hour and a half away..but if its worth it i will make the drive...gas prices just suck
thanx for advice!

I have heard a lot about the sea of green method anyone have any good or bad experiences with that??? i was gonna try it but wasent sure if it would be worth it...

it looks like they can recover ^^ and here's a question for any one good with DWC ok I got my setup done and I have a test clone in it but I didn't add any nutes into it but I don't have any actual hydro type of nutes, should I add some 20-20-20 to the water? the clone has 3mm roots