First grow, Alaskan Ice, AK48, PPP, 400w mh/hps, FF Soil
- Thread starter Kcannabis
- Start date
Kcannabis
Member
3/31/10: The first plant to be harvested is this AK48 plant named S&W. It has been about 55 days since switching to 12/12. I'm going to do a multi harvest on it since some of the lower buds don't look completely done yet. Here is a pic before cutting:
Closer view of a cola before cut and trim:
Here is a piece cut and half trimmed:
Closer view of a cola before cut and trim:
Here is a piece cut and half trimmed:
Attachments
Kcannabis
Member
4/6/10: The Alaskan Ice that I bent over has got so heavy that the whole plant is leaning over and falling over without support. I decided to cut half of the bent top to help ease the load on the plant. Plus I wanted to experiment with different times and ripeness. Half the hairs were orange on it and mostly swelled up so its almost done but a little early. Here is was it looked like before I cut, notice how the top is bent at a 90* and way out to the side:
here is the piece I cut off the top of it:
And here is the other Alaskan Ice that was topped and has 4 main colas, still has a week or two to go:
here is the piece I cut off the top of it:
And here is the other Alaskan Ice that was topped and has 4 main colas, still has a week or two to go:
Attachments
Kcannabis
Member
Similar threads
