First Closet CFL Grow

toolage

Well-Known Member
ALRIGHT!!! It's day 34, and holy crap I had a scare this morning. I came in and Juana was completely bent over and all leaves were dropped down to the ground. Somehow my timer died, not sure how but it did. I replaced the timer and gave it a good watering and it perked back up in less then 10 minutes.

But anyways, today is PICTURE DAY!!!!! I have a bunch of high-res pictures that I will post! Hope you all enjoy!!!

This is what I woke up to this morning
View attachment 92119

This is 10 min later after a good watering
View attachment 92120

Side Picture of Juana
View attachment 92121

This is what her two branches look like after her topping
day34Topping.jpg
 

toolage

Well-Known Member
AND MORE PICTURES!!!


Close up of the topping
closeuptop.jpg

Good Close-up of branches
inside.jpg

My Grow Closet
growroom.jpg

My new 400w HPS for flowering
400whps.jpg
 

FatTony420

Well-Known Member
Be careful not to overload that outlet outside your closet there, maybe im just being a worry wort but you dont want to trip your fuse or circuit breaker, or even worse, start a fire.

But great looking setup, your plants are looking awsome as well.
 

toolage

Well-Known Member
Be careful not to overload that outlet outside your closet there, maybe im just being a worry wort but you dont want to trip your fuse or circuit breaker, or even worse, start a fire.
Thank you fattony! I actually have already replaced that. I was worried about that too a few days ago so I went out and bought 2 more and have plugged them in different sockets. Thanks for the good eye and thanks for dropping by!!! Also thanks for the compliment!
 

toolage

Well-Known Member
I really didn't want to post these. But, I figured, hey lets all get a laugh out of this. So here are the present pictures of Mary and Stretch. They are extremely skinny and stretched and leaves are horrible. I should have cut these down a long time ago but I dont have the heart to. Tell me what yall think of them. Is it time to chop em down, or worth throwing into flowering?

On another note, I am also going to post some pics of my new k2 seedlings. Both seedlings are under 3 13w CFLs, 24/0,about 1 1/2" away with oscilating fan blowing.

Bottom of Mary
33MaryBot.jpg

Top of Mary
33Marytop.jpg

Bottom of Stretch
33stretchbot.jpg

Top of Stretch
33Stretchtop.jpg

Day 9 From Sprout K2
day9k2.jpg

DAY 7 From Sprout K2
day7k2.jpg

Side by Side
k2sxs.jpg
 

trues

Well-Known Member
id be proud to own that set up at the time of my first closet setup when i got my first apt looks great man you got sum survivers in youre garden
 

toolage

Well-Known Member
id be proud to own that set up at the time of my first closet setup when i got my first apt looks great man you got sum survivers in youre garden
Thanks!!! I like this setup ALOT, there are a few problems with this kind of setup though. Changing out your water is a pain in the ass. You have to take all 3 pots out and set them aside and move your resevoir to the bathroom. Also, your only allowed limited space for one resevoir. This setup is pretty much dummy proof, but I think I'm going to keep my mothers in my hydro and my clones/future plants will be going into soil. Thanks for stopping by! More pics to come on Tuesday when I throw them into flowering.
 

toolage

Well-Known Member
wow , just wow, dude your plants look sexy, I wish that I was a male pot plant and preggy the girls XD
Man, it feels good to hear such nice things! I'm hoping everything goes as well for flowering as it did for veg. My only concern now for my flowering room is getting the heat out. I'll keep ya posted on the flowering room when I get it setup.
 

toolage

Well-Known Member
__________________________________
Added 1.5TB Part A
Added .5TB Part B
Added 2 gallons of Water
Add 2tsp PH Down
PPM - 1100
Ph Level 5.6

Raised CFL's 2"

Sprayed leaves with water

Temperatures are starting to run hot, 3rd floor of apartment means I get the most heat. Going have to find a good way to vent/exhaust heat out of the closet for flowering.

Cleaned air stone
__________________________________
 

toolage

Well-Known Member
Well it's day 36 and today I finished the flowering room. I can't wait to get the high res pictures posted of everything! But for now I'll post some from my cell phone. Took me a total of about 6 hours to complete. I got my 400w HPS chained up and ready to go. The light is 27 inches away from the tops. I have my oscilating fan blowing on the tops of the plants and with my light barrier tarp I have a 120m fan blowing air out from the top. It's roughly 79 with the lights and fans going.

Right now the plants are looking very good and sturdy getting near 1.3 feet for each plant. Will be taking clones from Juana tomorrow. Still contimplating on throwing it into flowering on Tuesday, just going to see how much stress cloning does to it.

______________________________
Added 1tb Part A
Added .5tb Part B
Added 3 1/4tsp PH Down
Added 3 Gallons water

Ph Level: 5.5
PPM: 1150
______________________________


the 400w messes the pictures up cause of the spectrum so sorry for quality.


Outside of my closet, PC fan blowing air out from the top
tarp.jpg


Day 36 of Juana, showing signs of N def so I upped the nutes
day36juana.jpg


The whole setup is now complete and ready for action!!!
flowersetup.jpg

Any Comments/Questions are much appreciated! Will post pictures when starting flowering.
 

toolage

Well-Known Member
yeah my sister took mine for her baby shower. I should get back in the next few days so I"ll post the WHOLE op once I get that back lol. I'll keep ya posted!
 

grassgirl

Well-Known Member
Looking good Toolage :D

I'm really glad you managed to rescue them, dam timers :roll:

I've decided to wait til mine show preflowers now,
Good luck with the cloning, nice set up too :D
 

DMGIX

Well-Known Member
Hey Toolage, looking pretty ok. Some of the leaves look abit crispy or maybe its just me... Im growing K2 too in soil so im subcribin to this one . Im Down to one femme...check it out.
 

toolage

Well-Known Member
Looking good Toolage :D

I'm really glad you managed to rescue them, dam timers :roll:

I've decided to wait til mine show preflowers now,
Good luck with the cloning, nice set up too :D
Thanks alot GG, I'm too impatient for that :mrgreen: but I will keep ya posted on everything. I'm so psyched!!!

Hey Toolage, looking pretty ok. Some of the leaves look abit crispy or maybe its just me... Im growing K2 too in soil so im subcribin to this one . Im Down to one femme...check it out.
Yeah they do look crispy, but they are extremely soft! ITS MINDBLOWING! Now that I have them under this 400w hps, just last night Mary is making a STRONG come back! Stretch on the other hand which is my middle plant is still looking like crap. My K2 seeds are coming out nice, I'm keeping the 2 k2 seeds in the rockwool for another 4 days before putting them into bigger cubes.


I just got back from the store and got my humidity clone box. I also picked up a temp/hum lcd display instead of this crappy mercury therm.

Is a heating pad really that important? I've heard others doing clones without heating pads and it works just fine? Any insight would be great! Thanks!
 

toolage

Well-Known Member
K I just hooked up my therm/hum display and man my other thermometer was dead wrong lol. My reader is right above my plants and it's getting a steady temp of 72.3 deg with 20% humidity. Don't know why I didnt get one of these a long time ago.
 

FrostickZero

Well-Known Member
K I just hooked up my therm/hum display and man my other thermometer was dead wrong lol. My reader is right above my plants and it's getting a steady temp of 72.3 deg with 20% humidity. Don't know why I didnt get one of these a long time ago.
how much does a humid thing cost?
 
Top