Deep water culture adventure

GenBossman

Member
Hello and welcome to my little project.

this will be my 2nd grow my first grow was in 2002 useing a 5gl bucket made into a DWC did great untill cops freaked me out and i trashed the plant she was at her 5 weeks veg she was 4' -8" tall and 3' to 4' round she was so freaking beautiful fastfoward 2 years and i bought a 300 site Colosseum. yield 13 pound 3 oz 117 days 5 weeks veg 9 weeks flower 270 plants spider mites ate more then half the crop.Got freaked out about the cops again so i quit.

But lord and behold I moved to Colorado and i have my red card and my wife has hers so i don't have to worrier about it.

so we are starting off with a 5 plant set-up and as you can see I am in the process of converting my hottub/bathtube into a 4' x 8' x 8' tall grow room.


what she looked like before i did my thing.
Picture 004.jpg

There was a large light fixture right above the tube this will be my light and room exhaust the hole is 14" round.
Picture 002.jpg
some more in progress pic,s
room 8-23-12 004.jpg
that's where i will mount the light rail.after light rail & 1000W light is installed i will have 52-1/2" of grow space from top of bucket to bottom of the glass of the 8" air cool light tube.
room 8-23-12 003.jpg
8" air cool 1000W light tube thingy Very cool
room 8-23-12 005.jpg
hose clamped a rubber 3" hose onto the tube and put a spicit head on the other end for easy clean up.
room 8-23-12 006.jpg
I wrapped the 5/8" plywood completely with really thick plastic and leaned the plywood towards the drain in the tube for easy clean ups.I will be framing in a intake using a 8" 500 CFM inline fan in the back of the room down by the bottom where you see the cut in the plastic.

well that's all for today I will take more pics and give an update tomorrow.

Bossman
 

GenBossman

Member
OK lets talk about Clones these are my options

There are many Despencery out here that sell clones of there strains that they grow and sell.But there clones look sad
and i dont realy know what i am getting.
Know Clone Banks I have 2 in my area one gets bad reviews the other ok soso reviews.

But The SOSO Clone Bank is one of the oldest MMJ clone wholesalers out there BUT again they have only 6 strains.

check pic and strain names below
afghan11111111111.jpg
Afghani
Indica 25 / Sativa 75
Flowering: 56-60 days

bc-big-bud111111111111.jpg
BC Big Bud
Indica 65 / Sativa 35
Flowering: 50-54 days

blue-dream11111111111.jpg
Blue Dream
Indica 60 / Sativa 40
Flowering: 60-64 days

purple-kush11111111111111111.jpg
Purple Kush
Indica 90 / Sativa 10
Flowering: 56-61 days

trainwreck1111111111111111.jpg
Trainwreck
Indica 60 / Sativa 40
Flowering: 64-68 days


they have white widow also

what would be the best strain for a first timer and for my DWC setup.

I just found this guy friend hooked me up with him and was given hi praise for his clones this is what he has ready.

Black Bubba
Sour kush
Blue dream
Bruce banner
grand daddy purps


TnT The Happy Growers
 

trevronious

Well-Known Member
This is awesome. Good show.

All of those strains are pretty sweet. Are you doing multiple strains? Or 5 of one plant? I go with afghani personally, sativa fan.
 

GenBossman

Member
I am going to stick with 1 strain this time but I have another 5' x 5' x 8'tall grow room that i will setup after i see what this harvest produces.

I am leaning towards the blue dream it just looks nasty.

and from what i have been reading sativa is harder to grow then indica.

So either the
purple kush,
BC big Bud or
Blue Dream
from what i have been reading these are the most yield and easiest out of the 6 to grow
 

trevronious

Well-Known Member
You're correct on the sativas being a bit harder to grow. They just seem a bit pickier and take a lot longer to finish. In that case, blue dream all the way.
 

GenBossman

Member
Grow Room Update

Finish the 4' x 8' styrofoam sheets on both sides of walls installed the glass light air cooler fan "A 6" 350 CFM booster" instead of the 8" which i will be using as fresh intake
.
(To install 8" fan later I have a Hole already cut in plywood just have to cut a hole in the 4' x 8' styrofoam sheet covering the plywood)

Ran very thick insulated wire from breaker box where i will be installing a 60amp breaker in an empty slot I ran the wire across top of garage ceiling then stuck in through the same hole that some old TV cable was ran "Had To drill the hole a little bigger"
It comes out right next to the tube. one more hole through the wall into the bathroom and there you go all the power i need.

"very easy"

I have added some pics

roomset-up 8-24-12 002.jpgroomset-up 8-24-12 010.jpg
Wire from breaker box

My Buddy helping out n :)
roomset-up 8-24-12 018.jpg


the door leading to the room i will take better pic tomorrow
roomset-up 8-24-12 029.jpg



GOOD NIGHT ALL

TnT
 

hotrodharley

Well-Known Member
This is awesome. Good show.

All of those strains are pretty sweet. Are you doing multiple strains? Or 5 of one plant? I go with afghani personally, sativa fan.
What? Afghani is the typical indica. A blind wino could grow out most indicas as they use far less light than sativas. The indicas are generally far shorter and they are generally bushier. The indicas are a shorter grow time as well, generally speaking.
 

trevronious

Well-Known Member
check pic and strain names below
View attachment 2306284
Afghani
Indica 25 / Sativa 75
Flowering: 56-60 days

What? Afghani is the typical indica. A blind wino could grow out most indicas as they use far less light than sativas. The indicas are generally far shorter and they are generally bushier. The indicas are a shorter grow time as well, generally speaking.

Just going off of OPs info.
 

Coho

Well-Known Member
Afghani #1 and all afghani med strains I've run into are pure indica.. Who knows ...folks name stuff whatever they want.:-P
 

highway42O

Well-Known Member
Hello and welcome to my little project.

did great untill cops freaked me out and i trashed the plant she was at her 5 weeks veg she was 4' -8" tall and 3' to 4' round
4 feet eight inches tall at 5 weeks and 3 or 4 feet around steam o_O ?!?!?!? WHAT WERE YOU FEEDING THAT BABY ;)
 

GenBossman

Member
Well I am Back my job took me out of town longer then I thought.

No more out of town work for me.

Enough of me lets talk about the room.

ok this is what i have so far

New thermostat controller "Set at 68F heater turns on 80F turns off"
I have the 1000watt blowing into the room as well i have tested the room with this setup and my temp low in a 12 hour run was 66F and my hi was 81F pretty good i am going to turn the thermo up to 83F for the clones that where given to me by a friend the strain is called Sweet jack and I have smoked some and let me say "DAMMM" so it was an easy choose to go with. installed 4 inline vans cfm250 each another cheap air pump covered everything in mylar and we are off to the races here are some pics.

ooh I am using GH 3 part this setGH FLORA # PART.jpg
the clones where rooted in rockwool then i put them in the net pot with some hydroton that had been soaking in PH 5.5 water for 2 days the water in the 5gl buckets was just strait water set at a PH of 5.5 to 5.8 water temp 67deg.

so should I start the clones on nutrients either tomorrow or the next day what do you guys and gals think??

Should I start my Clones on Nutrients tomorrow??

or wait until Monday afternoon????


let me know.


SOME PICS
room the start 10-13-12 023.jpgroom the start 10-13-12 025.jpgroom the start 10-13-12 044.jpgroom the start 10-13-12 047.jpgroom the start 10-13-12 026.jpg

The Happy Grower
I
 

GenBossman

Member
General Hydroponics and one hell of a grow room co2 the works i was getting an 1-1/2 inch growth a day i shit you not
 

GenBossman

Member
Update on the baby's

First we named the plants
The first plants name is:
"I am # One " filled & drain 5 gl buckets 3# time twice with 1tsp proxcide
and 1 strait 100 ppm water.in separate bucket I Mixed 1/2tsp to 5 gl of GHgrow & GHMicro set ph to 5.5 nute temp 68deg.
pic of "I am # One"
room the start 10-14-12 070.jpg


Next plants was names "Budweiser" by my friend After he used his beer to cool the nute down in the bucket (ha ha) Not really just made it look like that. lol
Did the same as above except I made the nute a little stronger ppm190 ph 5.5 always temp 69deg
Picture of "Budweiser"

room the start 10-14-12 068.jpg
How Bud got his name
room the start 10-14-12 046.jpg

Then we have "Pocky" because we pocked a hole in the lid tryig to plug the filler hose on to the fitting that pocked through so pocky.Same as above except PPm170 PH5.5 temp 71deg.
Pictures of "Pocky"
room the start 10-14-12 076.jpg

Next we have my wifes and she called it "T's Baby Doll" Same as above except she was the smallest so PPM160 PH 5.6 temp 73deg
Pictures of "T's Baby Doll"
room the start 10-14-12 066.jpg

then "Scooby" my mom named this one same as above but ppm190 ph5.4 temp 68deg this is the biggest one
Picutres of "Scooby"
room the start 10-14-12 079.jpg
here are some random pictures.
room the start 10-14-12 031.jpg
PPM and PH Meters

Much needed supplies
room the start 10-14-12 072.jpg

bla bla bla
Frozen hamburger meat to cool the nutes down
room the start 10-14-12 050.jpg
room the start 10-14-12 055.jpgroom the start 10-14-12 056.jpg
room the start 10-14-12 059.jpgroom the start 10-14-12 060.jpg

thats all for tonight

the happy grower snorrrrrrrrrr
 
Top