purehemp
Member
Hello Guys
You can check the entire project on:
https://www.rollitup.org/t/help-with-this-handmade-stealth-closet-perpetual-grow.941550/#post-13557602
There I show why I need this project to runas quitely as possible.
This topic is about my project for a DIY COB and some doubts about my flowering área.
Hope to solve all them here.
height: 150 cm / 4.9foot / 59inches
widht: 117cm / 3.8 foot / 46 inches
depth: 60 cm / 1.96 foot / 23.62 inches
Well, I spend my entire weekend reading and watching vídeos about growrooms, I started to design my own project, that will fit my needs.
This is my first time growing, and I know that I should start taking easy and moving step by step, but I'll try to design and project everything single detail to make sure that I won't spend money on useless things.
This grid of 5x cobs will be enough for that area?
I'll use 5x CLU048-1212C4-353M2M2-F1 @3500k eachone with an active cooling system (processors coolers over heatsinks)
The dispososition of the vases are fine? six 7L vases, 32cm heigh will be enough to fullfill this scrog net? The scrog net is 30 cm above the vases.
!!! And the most important question !!!
This driver: MeanWell HLG-320H-C Driver @1400Ma
can run
5x 3500K Cob Módulo CLU048-1212C4-353M2M2-F1?
If anyone want this project on sketchup, just ask.
Sorry for any english misunderstanding, I'm trying my best!
You can check the entire project on:
https://www.rollitup.org/t/help-with-this-handmade-stealth-closet-perpetual-grow.941550/#post-13557602
There I show why I need this project to runas quitely as possible.
This topic is about my project for a DIY COB and some doubts about my flowering área.
Hope to solve all them here.
height: 150 cm / 4.9foot / 59inches
widht: 117cm / 3.8 foot / 46 inches
depth: 60 cm / 1.96 foot / 23.62 inches
Well, I spend my entire weekend reading and watching vídeos about growrooms, I started to design my own project, that will fit my needs.
This is my first time growing, and I know that I should start taking easy and moving step by step, but I'll try to design and project everything single detail to make sure that I won't spend money on useless things.
This grid of 5x cobs will be enough for that area?
I'll use 5x CLU048-1212C4-353M2M2-F1 @3500k eachone with an active cooling system (processors coolers over heatsinks)
The dispososition of the vases are fine? six 7L vases, 32cm heigh will be enough to fullfill this scrog net? The scrog net is 30 cm above the vases.
!!! And the most important question !!!
This driver: MeanWell HLG-320H-C Driver @1400Ma
can run
5x 3500K Cob Módulo CLU048-1212C4-353M2M2-F1?
If anyone want this project on sketchup, just ask.
Sorry for any english misunderstanding, I'm trying my best!