sheckylovejoy
Well-Known Member
Hey Rollitup. Like the subject says, I’m building out a shed into a grow room, and since I got such great advice on this forum, I wanted to pay back with a journal of our build which is starting today.
The shed is a 7x7 Suncast Sutton shed with 45 sq ft interior floor and a 322 cu ft interior space. I chose the shed because of brand, price and this is the steel-reinforced model.
We are siting the shed where I have been growing outdoors for years. This year was a weather disaster, and that finally made me bite the bullet and build an indoor setup. The site has a slight incline so we will have to account for that when making the foundation. A nice benefit of the site this that there is a 6” drainage pipe from my backyard patio running right underneath, so we are going to put in a drain in the shed floor down to that. The acetic condensate from the AC and dehumidifier will go straight into the drain, and it should protect from accidental floods as well.
I will be updating budget figures as we go along. There are some items which I already own, so I will note those for people doing their own budgets. When I’m done I will post the final budget to Google docs including links to buy.
I expect the build to cost around $5k, which not coincidentally, was roughly our annual cost of buying at dispensaries in CA before I started growing. I encourage you to do your own math here.
To date, I have spent $3193.77, about 2/3 of that figure being the shed and lights. Here’s a quick rundown (all prices include CA tax where applicable and shipping)
Shed with added shelf system and basket kit $814.54
This does not yet include materials for the shed foundation, electrical, insulation, SCROG screen PVC, framing and pulley system for light kits and other misc items. Also, friends are helping, but I don’t expect them to work for free, so there will be a cost in money plus green there. Again, I expect the total of around $5k + an oz for the guys.
Today is electrical so I will report back on how that went tonight or tomorrow. We have to run some Romex conduit pretty far under the house, so this could be an adventure. We will be putting two 20A lines into the shed: one for heating/cooling one for everything else. I will post my wattage calcs to Google Docs with the next post.
In the meanwhile, enjoy a picture of giant shed boxes in my backyard (attached image)
The shed is a 7x7 Suncast Sutton shed with 45 sq ft interior floor and a 322 cu ft interior space. I chose the shed because of brand, price and this is the steel-reinforced model.
We are siting the shed where I have been growing outdoors for years. This year was a weather disaster, and that finally made me bite the bullet and build an indoor setup. The site has a slight incline so we will have to account for that when making the foundation. A nice benefit of the site this that there is a 6” drainage pipe from my backyard patio running right underneath, so we are going to put in a drain in the shed floor down to that. The acetic condensate from the AC and dehumidifier will go straight into the drain, and it should protect from accidental floods as well.
I will be updating budget figures as we go along. There are some items which I already own, so I will note those for people doing their own budgets. When I’m done I will post the final budget to Google docs including links to buy.
I expect the build to cost around $5k, which not coincidentally, was roughly our annual cost of buying at dispensaries in CA before I started growing. I encourage you to do your own math here.
To date, I have spent $3193.77, about 2/3 of that figure being the shed and lights. Here’s a quick rundown (all prices include CA tax where applicable and shipping)
Shed with added shelf system and basket kit $814.54
- As explained: brand, price model. Shelf system will hold AC, and the baskets and hooks are to keep supplies and tools.
- I’m so bad with a soldering iron it’s criminal so I’m gonna let Dan from Timber Grow Lights put this together for me. The price is not that much higher than what I would have paid from a Chinese supplier on Alibaba.
- These single hose portable ACs are notoriously terrible, but I think the next step up, a window unit or mini-split, is huge overkill for this space and much more expensive. Remains to be seen if it can do the job, but at only 322 cu ft of space to cool, I think it will be adequate.
- Chose this model because of it’s flat-panel form factor, and also it has a low setting where it runs at 750W rather that the 1500W most heaters run at.
- Smallest version of the Frigidaire line. Highly recommended, works like a champ in my curing closet.
- Works great in the curing closet, remains to be seen if I need a more robust model for the grow shed.
- The long-wire sensor leads will allow me to put the humidity sensors right into the canopy
- Ditto for temp sensor.
- Chose because of brand, and low power mode
- Could have done better online, but decided to go with a local guy so I would have someone to whine to when the shit (inevitably) hits the fan.
- Using shock cord instead of string so I can more easily manipulate it
This does not yet include materials for the shed foundation, electrical, insulation, SCROG screen PVC, framing and pulley system for light kits and other misc items. Also, friends are helping, but I don’t expect them to work for free, so there will be a cost in money plus green there. Again, I expect the total of around $5k + an oz for the guys.
Today is electrical so I will report back on how that went tonight or tomorrow. We have to run some Romex conduit pretty far under the house, so this could be an adventure. We will be putting two 20A lines into the shed: one for heating/cooling one for everything else. I will post my wattage calcs to Google Docs with the next post.
In the meanwhile, enjoy a picture of giant shed boxes in my backyard (attached image)
Attachments
Last edited:
Anyway, once we get that all sorted out I will post pics and numbers.
