Blasting BHO
- Thread starter Ncs0816
- Start date
Afgan King
Well-Known Member
Dont need higher temps for crumble you can stretch and pull the shatter over and over working in air bubbles. This way you get your product of crumble and dont burn off any terpenes since you start losing them at 93°
Afgan King
Well-Known Member
Purge 72 hours at 93°f anything above 93 you will lose terps. If doing live resin purge at room temp 76-78° for 5 days.
Afgan King
Well-Known Member
I have a 2250 gram tube and a 900 gram tube with my mkc4 terpp extractor and a 1.2cu/ft oven and 1.9cu/ft oven. i make hash almost daily have a 50 gal bubble hash washer as well lol
Afgan King
Well-Known Member
No it wont I do this for a living.....it will be snap and pull
Afgan King
Well-Known Member
You want a honey consistency run at 90° for 72hrs you'll only be able to touch it fresh out the fridge it will be what we call sap
HarvesterPdx
Active Member
90 grams! Sweet
HarvesterPdx
Active Member
We call it snap and pull
HarvesterPdx
Active Member
Here's some indica crumble, it was I believe made with higher temp, I want to say like 195 using a electric skillet and heat gun, then purged for 30 or so minutes. It's purged in 3 gallon vac chamber. It's bomb too. It's tasty, no tane taste-
Attachments
Afgan King
Well-Known Member
You don't need that high of a temp lol you loose terps make snap and pull then pull it apart like dough and then kneed it essentially. You add air bubbles to make it crumble. I'll take like 120g of snap and pull and constantly pull apart then fold in half then pull apart then fold in half and make my butter that way. Hitting 195 is killing tons of terps and decarbing your hash
HarvesterPdx
Active Member
hmmm. interesting, I'm gonna clarify with my boy who I have do it in a bit. I know he did it this way recently and used to do the whole 3 day purge and low temp with a boiling water bath - Im'a find out. Thanks
I went to my local head shop and they actually had glass extractor tubes
When i pack the tube, How tight do i want it to be?
The tube is a 45 gram tube but I could barely fit a 1 ounce of small nugs in it-- and i packed it in fairly tight. Do i need to pack it harder? I always thought it needed to be packed firm but not too firm??
I ran 3 cans of 5x through it. After i blasted- i took the buds out and let dry for 45 minutes. When i went back to look at -the buds still had tons chrystals on it. How many cans do i need in order to blast 1 ounce??? If i need like 10 cans this is going to be an expensive hobby
When i pack the tube, How tight do i want it to be?
The tube is a 45 gram tube but I could barely fit a 1 ounce of small nugs in it-- and i packed it in fairly tight. Do i need to pack it harder? I always thought it needed to be packed firm but not too firm??
I ran 3 cans of 5x through it. After i blasted- i took the buds out and let dry for 45 minutes. When i went back to look at -the buds still had tons chrystals on it. How many cans do i need in order to blast 1 ounce??? If i need like 10 cans this is going to be an expensive hobby
hell yeah
went to my local head shop and they actually had glass extractor tubes
When i pack the tube, How tight do i want it to be?
The tube is a 45 gram tube but I could barely fit a 1 ounce of small nugs in it-- and i packed it in fairly tight. Do i need to pack it harder? I always thought it needed to be packed firm but not too firm??
I ran 3 cans of 5x through it. After i blasted- i took the buds out and let dry for 45 minutes. When i went back to look at -the buds still had tons chrystals on it. Howmany cans do i need in order to blast 1 ounce??? If i need like 10 cans this is going to be an expensive hobby
When i pack the tube, How tight do i want it to be?
The tube is a 45 gram tube but I could barely fit a 1 ounce of small nugs in it-- and i packed it in fairly tight. Do i need to pack it harder? I always thought it needed to be packed firm but not too firm??
I ran 3 cans of 5x through it. After i blasted- i took the buds out and let dry for 45 minutes. When i went back to look at -the buds still had tons chrystals on it. Howmany cans do i need in order to blast 1 ounce??? If i need like 10 cans this is going to be an expensive hobby
So what am i doing wrong. Pack it tighter?