Badass Stealth Grow in Cabinet, perfected

Had a few heat issues with the booster duct fans, I do not recommend those at all, they do not move enough air.

The temps stay in the lower 80s consistantly. I've spent a shit load of time on this design and I hope ya'll like it.

It measures inside 41" wide, 31" deep and 5' 8" high.

It's two cabinets I mounted together and cut them to join them into one.

Carbon Filter and I have two of the exact type of fan attached to the filter and the Easy Six reflector.

400 watt system MH/HPS.

Locks.

Beautiful wood work.

absolutely beautiful,I love the design.

Punk said:

Had a few heat issues with the booster duct fans, I do not recommend those at all, they do not move enough air.

The temps stay in the lower 80s consistantly. I've spent a shit load of time on this design and I hope ya'll like it.

It measures inside 41" wide, 31" deep and 5' 8" high.

It's two cabinets I mounted together and cut them to join them into one.

Carbon Filter and I have two of the exact type of fan attached to the filter and the Easy Six reflector.

400 watt system MH/HPS.

Locks.

Beautiful wood work.

Click to expand...

very nice setup

thank you thank you.

Very good idea. I toyed around with idea of using premade kitchen cabinets for my grow cab, then settled on building one from scratch. I just put the last coat of paint on the exterior tonight. Check it out in my sig.

Looks great.... but..... that makes each section 2'9" high. If it is possible to make the veg room less high and the flowering room higher I would do that. With lighting you might want the extra flowering height or you could LST/SCROG in the flowering room. That comment aside... one of the best stealth rooms I've seen on RIU and the locks are a sweet touch and I assume it's light proof. Mind you with the fan going it's not exactly stealthy and kinda defeats the object. Just how loud is it? Heat problems??? Maybe? Good luck with your grow. Hope you don't mind my small criticisms.

lowryder666 said:

Looks great.... but..... that makes each section 2'9" high. If it is possible to make the veg room less high and the flowering room higher I would do that. With lighting you might want the extra flowering height or you could LST/SCROG in the flowering room. That comment aside... one of the best stealth rooms I've seen on RIU and the locks are a sweet touch and I assume it's light proof. Mind you with the fan going it's not exactly stealthy and kinda defeats the object. Just how loud is it? Heat problems??? Maybe? Good luck with your grow. Hope you don't mind my small criticisms.

Click to expand...

NO, the cabinets are joined together to form one big cabinet. I cut out the bottom piece of the top cabinet, and the top piece of the bottom cabinet.

So... you're gonna veg and flower sequentially? Well... it's a great setup for that.

lowryder666 said:

So... you're gonna veg and flower sequentially? Well... it's a great setup for that.

Click to expand...

I like this cabinet allot
+rep
good job man

looks great! where are you exhausting?>


Peace

lowryder666 said:

So... you're gonna veg and flower sequentially? Well... it's a great setup for that.

Click to expand...

I have a clone cabinet, so I'm going to pull clones just before I bud the mother, then I'll re veg the mother AND the clones at the same time. Rinse, wash, repeat.

sirbudmaster said:

looks great! where are you exhausting?>


Peace

Click to expand...

Out the back.

lrg said:

I like this cabinet allot
+rep
good job man

Click to expand...

Thanks!

just plain beautiful! what cloning method did you use?

I'm interested in doing something like this but am unsure, love the locks! roughly what did this cost to construct. Great Job!

GanjaEnthusiast said:

just plain beautiful! what cloning method did you use?

Click to expand...

I just use the cheap Dip'n'grow. I haven't had it long enough to bud any clones yet. But again, I have a seperate cabinet for cloning. (not shown)

SwizZchEeZe said:

I'm interested in doing something like this but am unsure, love the locks! roughly what did this cost to construct. Great Job!

Click to expand...

Ya, the locks, obviously are not impervious to a break in, but it eliminates a buddy sneaking in your room and clipping his own samples.

The cost could've been cheaper, but I bought a lot of supplies that I never used, ranging from door sealers that didn't work, lots of bolts, screws, etc. I probably wasted somewhere in the area of $150 on shit i didn't need.

But all in all, the the whole thing cost me about $1000. The cabinets were $50 each. Just the fans and filter and lights cost over $400.

This was not a cheap project, but if I had to do it again, I could've kept the cost to about $800 had I been more careful.

I see your pots have no catch pan for water runoff, you may want to look into getting that electric strip off the floor, before you get a zap or worst yet a fire.

Scyntra said:

I see your pots have no catch pan for water runoff, you may want to look into getting that electric strip off the floor, before you get a zap or worst yet a fire.

Click to expand...

Ya I know...I can't find any square ones locally and I'm tired of buying shit so I'll probably make some, but you are right, it is important.

Looks pretty sweet dude!!!

Very nice grow cab.