A Cannabinerd's Journey
- Thread starter AlphaPhase
- Start date
Dr.D81
Well-Known Member
You tell me when and I will get the ice and ever clear together
AlphaPhase
Well-Known Member
Thanks yktind!
When I press hash to dab, I put some between a folded peice of parchment and heat a spoon up with a torch for about 3 or 4 seconds, then press the hash with the back side of the spoon running it over the hash fast so it doesn't heat up the hash too much in one spot, it'll flatten out, tthen take the folded parchment and press it against a cool glass or just put in freezer for a couple seconds to cool it off. Not all will dab but give it a shot, and like doc said, if it doesn't dab and melt, rosin is the next step.
For dabable hash, fresh frozen runs are best, but dry works too. For big runs I like the 220 for work bag and 160 for crap bag and a 73u for the good dabs Hope this helps
When I press hash to dab, I put some between a folded peice of parchment and heat a spoon up with a torch for about 3 or 4 seconds, then press the hash with the back side of the spoon running it over the hash fast so it doesn't heat up the hash too much in one spot, it'll flatten out, tthen take the folded parchment and press it against a cool glass or just put in freezer for a couple seconds to cool it off. Not all will dab but give it a shot, and like doc said, if it doesn't dab and melt, rosin is the next step.
For dabable hash, fresh frozen runs are best, but dry works too. For big runs I like the 220 for work bag and 160 for crap bag and a 73u for the good dabs
Hope this helps
Dr.D81
Well-Known Member
The stuff we ran was from last years outdoor and it will not press and dab right. PapaPayne we can hit the old hash with the ever clear and make it in to shatter. Plus I need to clean the bagsThanks yktind!
When I press hash to dab, I put some between a folded peice of parchment and heat a spoon up with a torch for about 3 or 4 seconds, then press the hash with the back side of the spoon running it over the hash fast so it doesn't heat up the hash too much in one spot, it'll flatten out, tthen take the folded parchment and press it against a cool glass or just put in freezer for a couple seconds to cool it off. Not all will dab but give it a shot, and like doc said, if it doesn't dab and melt, rosin is the next step.
For dabable hash, fresh frozen runs are best, but dry works too. For big runs I like the 220 for work bag and 160 for crap bag and a 73u for the good dabs
AlphaPhase
Well-Known Member
My buddy did the 240v wiring for me yesterday and installed a hardwired timer to control up to 4 lights with out a melt down if a wall timer. Just need an Ac now and waiting for a 6' centrifugal fan and filter and wall mount fan to come in the mail. Man, I gotta repot the plants since there all in party cups and root bound to hell and back atm but I don't have enough room in the veg room for 3 gal pots.. Boo. I picked the best 12 plants for the flood table, I think 5 headbanger #1, 2 headbangers #2, 3 chemalope, 1 blt and 1 clue. The 10 best glue will go into the ebb buckets at the end of the month. Once I move the 12 flood table plants into flower I will have space for the glue plants to repot them
AlphaPhase
Well-Known Member
It is looking fantastic but I only have 2 and one needs to be a mom it's probably the best looking plant I have now. Most plants are deficient since I haven't repoted out of party cups in weeks, but the blt just grows like a beast none the less.
So here's the line up.
5 headbanger #1
1 headbanger #2
1 blt
1 gg4
2 clue
2 chemalope
All brand new strains so let's hope it doesn't turn into a hermie shit fest lol
I'll put them in flower as soon as I see new growth and deficiency clear up. Then I'll pick the best 1 of each strain for mother plants and toss the rest of the clone doubles to free up veg room space to uppot 10 glue to flower in the ebb system in 2 or 3 weeks or so. Soooo close to being back on track except all my plants look like they went through hell. I need to focus on getting the veg room healthy again (takes weeks off veg if things are running perfect, since they aren't I'm behind but oh well
)
it's probably the best looking plant I have now. Most plants are deficient since I haven't repoted out of party cups in weeks, but the blt just grows like a beast none the less. So here's the line up.
5 headbanger #1
1 headbanger #2
1 blt
1 gg4
2 clue
2 chemalope
All brand new strains so let's hope it doesn't turn into a hermie shit fest lol
I'll put them in flower as soon as I see new growth and deficiency clear up. Then I'll pick the best 1 of each strain for mother plants and toss the rest of the clone doubles to free up veg room space to uppot 10 glue to flower in the ebb system in 2 or 3 weeks or so. Soooo close to being back on track except all my plants look like they went through hell. I need to focus on getting the veg room healthy again (takes weeks off veg if things are running perfect, since they aren't I'm behind but oh well
)
AlphaPhase
Well-Known Member
I still have to organize and do some things but here's where the rooms at so far
AlphaPhase
Well-Known Member
Thanks man, and totally agree different climates can change everything. I just had my first 10%rh day in the veg room today lol. Got a speed controller and my wall mount fan in the mail today though so I should be able to get things in check in the flower room at least. $38 free shipping for a hydrofarm 16" wall mount fan on eBay, was super cheap and a great fan
I was going to move the 2 gallon pots to flower today but got kid napped by @Aeroknow for a fishing and off road adventure lol. Good times tho, tomorrow I'll get the plants moved under the mh and prepared for flower. Also gotta do the ducting and all home Depot had was this huge ass insulated duct, smallest insulated duct they had and it looks like r10000 lol, gonna be crazy putting this stuff up
I was going to move the 2 gallon pots to flower today but got kid napped by @Aeroknow for a fishing and off road adventure lol. Good times tho, tomorrow I'll get the plants moved under the mh and prepared for flower. Also gotta do the ducting and all home Depot had was this huge ass insulated duct, smallest insulated duct they had and it looks like r10000 lol, gonna be crazy putting this stuff up
Aeroknow
Well-Known Member
God, who did ur electrical? That dude must be some bad-ass motherfucker I tell ya
lol 
One more light, I would have hooked you up contactor style.
Lol! I was thinking about kidnapping you again tomorrow to be my caddie
lol
AlphaPhase
Well-Known Member
Hell yeah man you're like a electric master, I'd have burned the block down and probably killed myself lol. I'd be down to caddie but I gotta finish some stuff up here, next time your out lemme know and I'll play 9 holes with ya, and caddy the holes I can't play 
I'm dying to get on the course
Here's the glue hash all dry and gooey af! Lemme know if ur friend tries the sample, nikki is lovin it
I'm dying to get on the course Here's the glue hash all dry and gooey af! Lemme know if ur friend tries the sample, nikki is lovin it
AlphaPhase
Well-Known Member
For sure man, I don't know jack about electrical so super glad Aero hooked it up. I really need to get my fishing license soon but I need to get my cali id card, not sure if other California identification would work to get the license.
I'm moving soooooo slow today, went in the grow room to work on some things and only got the new exhaust and filter hung but still need to do the ducting. After the ducting is done I can move the plants to the table. Was hoping to get it done today but it's looking more like tomorrow at the pace in moving lol
I'm moving soooooo slow today, went in the grow room to work on some things and only got the new exhaust and filter hung but still need to do the ducting. After the ducting is done I can move the plants to the table. Was hoping to get it done today but it's looking more like tomorrow at the pace in moving lol
AlphaPhase
Well-Known Member
I said fuck the pain and went back out and finished the 5x5 and hung the wall fan, holy damn, done for now and plants go in tomorrow I don't think I'll ever use insulated ducting again, or at lleast this type, wayyyyy to hard to work with
I don't think I'll ever use insulated ducting again, or at lleast this type, wayyyyy to hard to work with
AlphaPhase
Well-Known Member
It's just so bulky, like 12-14" wide with a 6" thin plastic duct inside the insulation. With a helper it wouldn't be so bad, but I was lugging the 25' duct in one piece because I had to measure the length I needed (including extra length to allow light raising or lowering) so I had to hold the duct up, figure out the length needed, by moving one arm to the light hood and the guessing where it should be lol. Not a 1 man job really. Then it doesn't really fit well through a 6" duct in a tent, 8" ports would be easier. It's just super bulky to work with alone. I didn't realize it was going to be so thick since I bought it online and all the other insulated duct I've used was 1/2 the size like this in the pic. After install I'm happy as hell though, no leaks and the exhaust is like 3x better air flow and power than using cheapo duct . Next time I but ducting it won't be from home Depot though and it wont be r6, r6 is WAY to big and that's all home Depot has. Also duct under the insulation is like hhelium balloon material, worse than the cheap aluminum foil type ducting
AlphaPhase
Well-Known Member
The ducting in the pic isn't available in store, it's online only,unless my home depDepot sucks lol, order online and save the hassle. I was just in a time crunch
Dr.D81
Well-Known Member
I am going to have to go to this my self.