FACTORY DIRECT
CHILLERS
Original picture by original manufacturer.
We have been selling and manufacturing these chillers for 5 years.
We do not sell chillers for resale
and any chiller resold
will not be warranted.
Reef Tank / Fish Aquarium Chiller
Description and Specifications
Brand New Custom Built Chiller
½ HP 110V Quiet and Reliable
Retail Value $2000+
Custom built to quickly and efficiently chill marine coral reef tanks. Originally built for aquaculture this chiller will bring down the temperature in any tank fast and maintain the temperature easier than any other chiller of its size.
The design is different from that of typical mass produced ½ HP chillers that use a minimal amount of coils that are just barely enough to operate properly. This custom chiller has more than enough coils to make the heat exchange fast and efficient.
Why pay 3 or 4 times as much for a chiller when this one sells for less than a ¼ HP model that will run and run using more power and taking considerably longer to cool down your tank?
This heavy duty unit will probably outlast your tank!
1/2 hp chiller
110v and only draws 4.8 amps at full load
Flow thru tube in shell heat exchanger
1'' Threaded N.T.P. water supply in/out
Oversized heat exchanger for maximum heat transfer
Protective epoxy black coat on housing to protect from any salt spray
All copper also coated with epoxy.
Size 17x12x11
The second picture is plumbed to my 500 Gallon Reef Tank and it has been working for over 5 years now.
The Heat Exchanger is made of 6061T6 Marine Grade Aluminum with PVC shell
This chiller is specifically made for salt water reef tanks
No copper touches the Salt Water
Min Flow rate is 500 GPH the MAX is 2000 GPH
Up to 400 Gallon Fish Tank
_________________________________________________________________________________________________
ALSO AVAILABLE CONTROLLER FOR CHILLER $85.00
Ranco Digital ETC Series Controller
Model ETC-111000
The Ranco ETC is a microprocessor based temperature controller suitable for switching 120Volts at up to 16Amps for heating or cooling applications making it suitable for a wide range of applications. This is a great universal controller for any application where switching 120Volts or temperatures outside that of a normal home thermostat is required. The sensor with an 8' foot cable and instructions are included with the unit.
Specifications:
Temperature Set point Range: -30 to 220F
Differential range: 1 to 30F
Input Voltage: 120VAC, 208, 240VAC
Pilot duty: 125VA at 120/208/240VAC
Sensor: Thermistor, 2" long x 1/4"dia with 8' cable (included)
Control Ambient Temperatures
Operating: -20 to 140F
Storage: -40 to 176F
Ambient humidity: 0 to 95% RH, non-condensing
Enclosure: NEMA 1
Agency Approvals: UL listed, file E94419, Guide XAPX, CSA certified, file LR68340, class 4813 02
Relay Output Ratings - NO (NC)
120V
208/240V
