Wait so you have a pipe that goes in. Then one that is submerged in the water? And one that goes out to the outside. You add the ona gel to the water? As you can see I'm very interested in putting one of these together. Also what is 90's? __________________
90's are plumbing fittings that make a 90 degree turn, so I'll try and explain better. In the lid of the bucket you will cut two holes on opposite sides of each other, also offset them. Assemble the fittings and pipe as shown in diagram. Fill the bucket until the water level is 3/4 of the way up the horizontal section of the pipe. Attach lid after applying much silicone around the edges. Seal pipe holes in lid with tape or putty or silicone. you could even add an air stone to aerate the water further. Connect vent pipe from grow box and your done. Outflow can be expelled outside or back into the room. Hope this clears things up. I will try to make a better diagram later today.
back to the bud... Judging by the one picture of the buds it looked done. The pistils have recceded completely and they look pretty tight. What do the trichs look like? I'd say chop!
Trichs are showing mostly cloudy, but I'm more concerned with yield at the moment, I need the weight so I can get some better lighting for my perpetual grow.
Go the extra 7-10 days, you won't be dissopointed. And on another note, you have quite a nice looking lady there. I don't think I've seen as nice a grow with only CFL's.
Thanks for the kind words, first grow, trying to figure it all out. Thought I might make CFL's work for a perpetual medical grow but I'm going HID as soon as possible. And I will probably harvest next Friday.
Wow, you made a sortof ona bucket/scrubber hybrid. This way you don't need a super high cfm fan either... nice.
yep it works well so far.