Search results

  1. Z

    Testing Timber's B-lux Decor Vero fixture(1750k)= Hello beautiful SPD, finger still on the trigger

    So funny most popular number in Italy is wait for it... 7
  2. Z

    added uvb-10 to 6 cob mix(2800k-6400k)

    Let me see... humans don't produce oils to protect themselves from UV of any sort! What we as humans do in reaction is get sunburn and that can lead to cancer cells so not such a good analogy to be giving. How humans have adapted is to alter the melanin levels genetically in response to the...
  3. Z

    Citizen Horticultural COB CLU04H - Plant RB

    Exactly my thoughts when I looked and compared the 2 charts side by side. I've purchased a number of the 1750K vero C's and will run them this time round. What I see is that it will give me a huge boost in photon's in the 620-680nm range and go right on out to the IR 730nm+ with the added...
  4. Z

    Fogponic grow

    Just wondered what happened? Did you manage to get a grow happening with the fogponic method? Currently on second run now using fogponics and shallow water re circulation approx. 1" depth in tubs from 100L res., incredible root growth and massive plants.
  5. Z

    Bridgelux EB Series Build

    I have made a series of veg lights using the Samsung 4ft A strips, I run them at 700ma on a coralux controller. Currently running 12 strips over a 8'x2.5' space achieving 250-300 umols and it's absolutely plenty to veg in. I happened upon a brand new 4'x1' fluoro light fixture for free and will...
  6. Z

    Bridgelux EB Series Build

    Hi everyone, Really enjoying seeing the builds with these strips and other taking off... currently building nice 4ft clone light from discarded flouro housing... What I was want to know is has anyone found suitable diffusers for the Bridgelux EB series strips? Thanks in advance.
  7. Z

    Electrical help

    Well done asking questions is the way to understanding. I see quite a few builds of lights here by people with little electrical training and sometimes I cringe at what I see and I'm not a qualified electrician either. mim1 can I suggest when you setup your room that you use a watt meter to...
  8. Z

    Sorry they are Australian. They are extremely heavy 110cm long weighing in at 10KG each. Also...

    Sorry they are Australian. They are extremely heavy 110cm long weighing in at 10KG each. Also took many hours to precision drill and was a real pain. Recommend using pin sinks 140mm x 80mm half the cost and predrilled usually for a variety of cobs. Be sure to put a fan over every pin heat...
  9. Z

    Hi PappiOnFire, Yeah I love the Mars Bars also, you can use the heat sinks from the Mars 900...

    Hi PappiOnFire, Yeah I love the Mars Bars also, you can use the heat sinks from the Mars 900 you have. They were a labor of love taking many hours. If I had the money I would have used pin sinks, much quicker. Happy growing
  10. Z

    Finally some Mars Bars and my lights are going up

    Final data. Mars Hydro conversion lights worked a treat, heavies worked a treat, Gemini twins worked a treat, cutter side strip worked a treat. Total wattage from the wall 1900W on a 10/14 (on/off) cycle (63 Days) - cured weight 2000 odd g - consisting of 1000g of prime bud - 1000g consisting...
  11. Z

    Spectral lightmeter Gigahertz-Optik MSC15

    Can you give us a late afternoon one as well. Keep the data coming it's fantastic stuff.
  12. Z

    Cutter Electronics: Complete DIY COB kits

    Hi Mark, What's happened to the new heat sinks that were coming? http://www.cutter.com.au/proddetail.php?prod=cut3020 Thought these were going to be available mid-august 2016 ... it's the 1st sept. tomorrow Can we get an accurate ETA on these? Been putting off new builds until these become...
  13. Z

    DIY Cree COB light from MarsII 1200

    The Mars series 2 usually use drivers rated from 55v-100v with output of 700ma +-5%. There have been a couple of other variations on the ratings but for the series 2 these are the main ones. Not sure that the Amp testing is been done/read correctly... as that figure of 40ma would have resulted...
  14. Z

    How hot do led's get?

    Unfortunately the Mars 2 lights have a design flaw in the lens used over the 450nm or lower led's they have on them. To much energy is trapped by the lens which become opaque decreasing that spectrum available to the plants and heating up the diode. Eventually the diode fails due to heat...
  15. Z

    How hot do led's get?

    Epistar I believe. Mars Hydro Lights are better heaters than lights :) Good luck. PS Love your light XPG3 ...
  16. Z

    Finally some Mars Bars and my lights are going up

    Quick update All goes well, incredible, so glad I took the time to learn and grateful to those that blazed the trail.
  17. Z

    Should I always use full spectrum?

    And when they do fail due to a design flaw that exists within the series 2 lights, and now the reflector series due to the "upgrade" to 5W diodes?... Epistar is what they use if I'm correct. A lot of burnt people, oh and they don't honor warranty laws either, although I understand they have...
  18. Z

    Cutter Electronics: Complete DIY COB kits

    New Heat Sinks arrived yet mark?
  19. Z

    Finally some Mars Bars and my lights are going up

    Standard heat sinks from cutters with 72v CXB3590's mounted and 12v fan above heat sink which is probably why it looks so huge... Drawing 1900w from the wall at the moment and no air con running at all, small 4" intake and exhaust of 6" Run a dehumidifier 24/7 which adds some heat to the room...
  20. Z

    samsung hard strips

    Been running the cutter hard strips for a few weeks now on the Mars Hydro Series 2 driver and it's definitely worth making these, planning to now make 4 - 6 of these bars and running them on 48V meanwell 350W power supply through Meanwell LDD's and Coralux StormX controller. This will ensure...
Top