Recent content by MightyGreen

  1. MightyGreen

    ...All Things Vero...

    Anybody used Veros decor series yet ? Red Peak shifted from 605nm to 645nm and goes further into the red-spectrum near IR-level.
  2. MightyGreen

    Soldering cobs

    AC main line earth ground to heatsink, easy. Plasti-Dip , Kapton (not recommended from me) and Hot glue is removeable without any Acetone .
  3. MightyGreen

    Soldering cobs

    Plasti-Dip is what i use for all my solder points . U could aswell use Kapton-tape , epoxy, hot glue or nail polish. Edit: Using epoxy, nail polish or Plasti-Dip make sure your working in a well ventilated area. FYI put a ground on your heatsink and if u dont have a RCD installed in your power...
  4. MightyGreen

    ...All Things Vero...

    Vero 22 Gen7 C-Version is very cheap and seems to be soft driven very efficient. My question is regarding the Bridgeluxx Product Simulator and its results and how well they transition over to the real world. So when i feed a Vero 22 Gen7 C-Version 200mA can i expect to be (without driver...
  5. MightyGreen

    paste question

    You could aswell just make your own instead of buying it EDIT: There are some noticeable differences in TIMs (ΔT wise) so check them out before you buy or make one.
  6. MightyGreen

    Indoor 882 sq ft BASEMENT

    I cant contribute anything to this but i would extremely appreciate seeing a pictured build and grow thread from you .
  7. MightyGreen

    Female or just overanxious

    Ive used coffeegrinds and teebags just for kitchenherbs, they work but it needs time for bacterie and such to break them up for the plants to actually use them. So my advice would be, when your on a tight budget, get some cheap chemical fertilizer from your nearest hardware store with a...
  8. MightyGreen

    Female or just overanxious

    The only thing i see is that your plant needs more Nitrogen.
  9. MightyGreen

    FLUSHING

    To a degree yes.
  10. MightyGreen

    FLUSHING

    Well my thought about it was that by depriving nutes i simulate autumn, so that the plants now death is immediate and that they put all there last reserves into blooming to reproduce. Im currently in the making of a new cab and switching to hydro, i might give it a try but i always ended up with...
  11. MightyGreen

    FLUSHING

    Are u keeping the Nitrogen levels up until harvest, so that the stems dont get purple ?
  12. MightyGreen

    FLUSHING

    True, again. Whats your take then on flushing ? Ive never tested other methods, i was always satisfied with the outcome weight and taste wise. Edit: I use soil, if somebody cares.
  13. MightyGreen

    FLUSHING

    True, but i can do everything to further improve the uptake of the nutrients the plant has stored. BTW i definitly taste a difference to the weed i grew and that of a friend of mine that flushs 1 week prior harvest (cuts from the same mother)
  14. MightyGreen

    Silencio ! Need help building a super silent cab.

    @BeastGrow Panasonic whisperline is nothing else then an encased centrifugal fan (the one with the ceiling intake) or an axial fan as in the fv-series, but thx for your recommendation. @mc130p They are still louder then a throttled centrifugal fan and way more expensive and also take up more...
  15. MightyGreen

    FLUSHING

    @Dr.Who I like my weed without any fertilizer in them left. At the end of the second week usually all leafs are yellow and i can be sure to get a good smooth smoke.
Top