Recent content by md2of2

Chem trail juice got in your bho.

@Buzz I'll sell you my TE-700. @Fade, thanks for the tips. I've learned a lot reading your posts. Much appreciation for those that give time and knowledge.

Yeah, idk. Freezing should trap water. Fresh or dried same color. I'm wondering if I'm recovering to fast. It's passive so I'll I'll put Tami into warm water causing butane to boil and creating pressure diff between Tami and recovery tank. I'll pull a vaccum on Tami next time and see if that helps.

Wonder why he pulled his videos, they could be helpful to some in this community.

What is the capacity of this machine and is it able to reclaim more than 90% of the ethanol given more time. Thanks.

@bj, lol. You should be able to unscrew that tip on your faucet very easily and get a replacement at any hardware store for a couple of bucks. You could save it and then just put it back on when you move out. I used to snatch the screens out of them back in the day.

Great info and inspiring. I've about had it with bho, cant seem to get any repeatable outcomes, or good ones at that. I recently picked up a tamisium thinking that might make a diff over closed loop systems, not. I believe I'll delve into this a bit. I do have a couple of questions. 1. Is the...

Well, 2 more runs and still dark. I did 1 with fresh picked that I froze for 2 days. All runs have been done at sub zero terms. The fresh stuff I left as whole nugs trying to mitigate chlorophyll. I feel like there is a contaminate somewhere. I scaled my loading ratio down to 4/1. Using new...

Thanks guys. I'm thinking it was a loading ratio prob. The Tami website says 4 to 1. I had 150 grams and was pushing thru 1200+ of tane. I'll try again 2moro and update. Is there a Tami forum somewhere out there anyone knows of? Thanks again.

Hey guys, I was wondering if anybody out there has experience using a Tamisium extractor. Picked up the half pound model from a friend of a friend for a good price. I've used it a few times and keep getting very dark extraction. The tane and material has always been frozen as well as the...

Dude, he didn't ask your opinion of me. What's your answer?

I'm sorry maybe I jumped the gun on that one. It could be that your understanding of the definition of canopy is wrong. Also the small details do matter. Give me your opinion A+B=C, A=1. You can't because I left out the to much info, there are an infinite amount of correct opinions. None may...

Your light on your vert set up has nothing in front or beind it, only side to side. Huge waste of light imo. In horizontal you have have 3ftx6ft= 18sqft canopy. your vert setup would actually have 3ftx3ft=9sqft x4= 36sqft. So IMO you should probably brush up on your math skills before attempting...

Here is a link to the driver http://www.inventronics-co.com/upload/EUC-200PxxxDT(ST)_2013112609085725011.PDF I was looking at the 240 but it has six channels. I think I heard they wont work correctly unless all channels are filled. If that's not correct here is the link for the 240w 6 channel...

Hey guys I need some advice. I currently have a couple of DIY Cob panels that I'd like to upgrade. In a side by side with HPS they fell a little short but I still believe done right they'll outperform the HPS. So on one side I had a 3x6 tray with 2 HPS 1000 dumbed down to 500 each, the other...