First HPS Grow - 600w - Multiple Strains - Closest

[SOMEBEECH]

Yeah that's a good idea, see if I can find a good 8ball kush pheno. I'm hoping they will just grow out of it when they get a little larger, like you said.

Yeah if I got some heavy NL in that BD x BLG I'd be stoked!

Hell,Bro all the genes from it are great.

Well the veg cab was getting too hot for the clones in the dome, so I rigged up a little area in my bathroom. Just an average 15w aquarium light. The light doesn't look at blue as it does in the photo, I think it's more of a purplish/white in person. It doesn't have the color on the label.

Hella yes.Be fine.You just made a CLONE factory.Look at all that light now for your CUTS!
Beech

 

[AllDayToker]

Haha, yeah I think they should be much happier in a cooler area. Easier to give them more attention where they are too. Going to smoke a bowl of schwag and then look for some clones!

 

[AllDayToker]

Well I picked 3 clones off my lankier Plato, and 2 off the shorter, more even branched one.

All I could really get, the rest are pretty much tops I don't want to lose since I'll only be harvesting 3 plants this up coming harvest, plus that one Auto I got going.

All are from low branches though, some are a little small but I think they will get the job done in their new environment. Also hoping the two I already had in there will bounce backing from being moved.

 

[AllDayToker]

I got a few leaves showing some problems on all three of my flowering plants. Been researching for awhile and can come up with a solid cause, wether it's from heat or stress or nutes or age or deficiency or what. I have been concerned about it because the plant has been growing very healthy, just with a few problems. I was hoping I could get some input from you guys.

Plants have been watered twice with plain water since last feed. Last feed was 600ppm for the two Platos, and 750ppm for the Unknown plant. Temps from 79-82f. rH from 30-40%. Plants 15-18inches from light. By the way the picture is only Plato plants, but having same problem with each flowering plant. From left to right it's from middle section, lower, then lowest. All upper and top growth looks great.



Thanks. If you need anymore information let me know.

 

[SxIstew]

Bro, you need to switch to General Organics. At lease until you can get the feeding down... then switch away.

You have had too many problems with nutrients this grow. You are only causing yourself more hassle.

General Organics. Try it.

 

[hbbum]

I am no pro but it kind of looks like Potassium deficiency to me, could be lockout since it is affecting multiple strains the same way or just what you are feeding them.

 

[Javadog]

Plato is indeed an interesting breed.

I found nothing on it on Seed Finder....what is it's story?

Take care,

JD

 

[AllDayToker]

Bro, you need to switch to General Organics. At lease until you can get the feeding down... then switch away.

You have had too many problems with nutrients this grow. You are only causing yourself more hassle.

General Organics. Try it.

So is that the problem? I was feeding them with just GH flora micro 300-400ppm and I was told it was safe to go to 600ppm. I've done two heavy watering after that feed.

 

[AllDayToker]

I am no pro but it kind of looks like Potassium deficiency to me, could be lockout since it is affecting multiple strains the same way or just what you are feeding them.

I've already watered with plain water twice with good run off, could it still be locking nutes out if that's the case?

 

[AllDayToker]

Plato is indeed an interesting breed.

I found nothing on it on Seed Finder....what is it's story?

Take care,

JD

No idea. Just got a batch of some nugs a while back, some dank stuff. I think I remember it having a Plato smell to it so I think that's why they named it that. So I just stuck with the name. I have no idea what it really is, just some bagseed. Very indica dominate though, great large fan leaves, super bushy. First time I'll be flowering them. I wonder how mine will compare to what I had.

 

[hbbum]

Probably not, what is the K value on your feeding schedule?

 

[AllDayToker]

Probably not, what is the K value on your feeding schedule?

Pretty sure flora micro is 5-0-1. That's all I feed the Platos at the moment.

 

[SxIstew]

So is that the problem? I was feeding them with just GH flora micro 300-400ppm and I was told it was safe to go to 600ppm. I've done two heavy watering after that feed.

I don't know. It looks nutrient related.
I haven't had any nutrient issues(Minus my solo cup contest entries, because their roots are so small and the plants are so big.)
In any of my plants. in a long time.

 

[AllDayToker]

Alright. It doesn't seem to be affecting the plants in any way. I just rather have my plant look great from top to bottom. And I don't want to over look it and whatever it is kill my plant over night.

I sent a message to Beech earlier, hes been telling me what to feed and such so when he gets on I'll see what he has to say.

 

[SxIstew]

BEECH is an awesome helper. But you do have to do some research on your own.

Having a plant 100% top to bottom is not easy.
Try just growing it first.. lol

I've got a healthy garden and some yellow or blotted leaves. but nothing is sick. And i have seen enough issues to know when one is starting or if it's just a old leaf dying off months after a deficiency(which those leaves will still show signs of illness)

Personally if your plants look OK and if it was only a few leaves here and there. donn't stress over it

 

[AllDayToker]

Well in my first post I said I've been doing research, so don't start off saying I don't do things on my own. I do plenty of research.

I just figured I'd have some people take a second look compared to my inexperience and I didn't really find anything specific in my web browsing.

I'm not stressed about it, I was just curious if it could be something or not. I know the plants look well.

I guess next time after I do research, can't find my answer, I just shouldn't post it and try random guesses of my own that I think might help with my inexperience. Instead of asking experienced people.

 

[Javadog]

Well, remember the unfortunate truth that people will tend
to point out errors...more consistently than they will point
out correct statements.

Exposing yourself will bring out the answers....but, yes, you have
to weather the occasional impatience.

Good luck,

JD

 

[SxIstew]

Hey, First off i didn't give you an attitude. You ask us for help daily and usually receive it. So don't come at me like that again or i will stop responding.

Second. All i said was you don't have to go to BEECH for everything. I have seen 3/4th of his responses on Google myself, in other threads and posts..

So as you may do your own research, you still ask questions to all of us that can be easily answered if you did a little research.
So maybe you should read a little more.

Note: Easiest way to learn fast. Research BEFORE you start.
this way you aren't begging for questions every day to make sure you are doing everything correctly before you lose all your hard work.....


I'm done responding for a while.
Thanks for the attitude. I'm out.

 

[AllDayToker]

Thanks for the input guys. I'll go back and keep searching, maybe I missed something. I'll make sure it's super serious before I post any problems.

 

[AllDayToker]

I'm glad, your help felt rude to me anyways.