Shatter help!

[cbuts05]

Been making shatter for a bit now...still can't get it right ..please help.

My process .

90 degrees on my skillet filled with water .
Blasted onto Pyrex dish
Sit til no movement and 90degrees.
Scrape onto parchment paper and put into vac at same temp for 12 hours in homemade glass jar setup to vac pump


After the first few hours it looks nice n bright kinds seethrew, but still looks like alot of bubbles.
When finished half looks like shatter but not as clear, milky, and alot of budder? Around aswell.

What am I doing wrong, please and thanks !!!

 

[natureboygrower]

you aren't blasting around that electric skillet are you?

 

[Budddha]

Ur not purging enough out of your "shatter." Shatter shouldnt budder up. If it does it means theres still moisture and or solvent in it. Idk how much pressure youre pulling on your home made vac chamber so it may take you days to get real stable shatter. I purge for usually atleast 18 hours and i have a strong pump and a non diy descicator.

 

[THE KONASSURE]

How many Oz`s of bud did you blast ?

If your answer is under 1 no one can help you

if I`m doing bho I like to have 100g min ganna take a risk gotta be worth it

 

[natureboygrower]

Ur not purging enough out of your "shatter." Shatter shouldnt budder up. If it does it means theres still moisture and or solvent in it. Idk how much pressure youre pulling on your home made vac chamber so it may take you days to get real stable shatter. I purge for usually atleast 18 hours and i have a strong pump and a non diy descicator.

How often do you release vac and revac?

 

[Budddha]

How often do you release vac and revac?

I leave my pump on durring the beginning. Towards the end i revac whenever the pressure drops.

 

[cbuts05]

you aren't blasting around that electric skillet are you?

Uh ..yeah ? Into Pyrex dish ..am I not supposed to ?? That's how I seen my buddy do it..lol

 

[cbuts05]

Ur not purging enough out of your "shatter." Shatter shouldnt budder up. If it does it means theres still moisture and or solvent in it. Idk how much pressure youre pulling on your home made vac chamber so it may take you days to get real stable shatter. I purge for usually atleast 18 hours and i have a strong pump and a non diy descicator.

Well it seems every single run I do budders up..what am I doing wrong

Does this need more vac ? Is my temp right ?
I feel like if I vac more, more will budder

 

[Budddha]

Well it seems every single run I do budders up..what am I doing wrong

Does this need more vac ? Is my temp right ?
I feel like if I vac more, more will budder

Well if you arnt pulling down to 29hg or near it you may not be able to get real deal shatter. You might be able to make pull snap if youre close to it. I make clear and gold shatter and my temps never go above 115. Its kind of hard to answer your question acurately if you dont know how much hg youre pulling. The best advice i can give you is to get it spread out as thin as possible, keep purging, and keep fliiping your "shatter" over after it stops reacting. There are still large bubbles in your stuff, it clearly needs to purge more.

 

[natureboygrower]

Well if you arnt pulling down to 29hg or near it you may not be able to get real deal shatter. You might be able to make pull snap if youre close to it. I make clear and gold shatter and my temps never go above 115. Its kind of hard to answer your question acurately if you dont know how much hg youre pulling. The best advice i can give you is to get it spread out as thin as possible, keep purging, and keep fliiping your "shatter" over after it stops reacting. There are still large bubbles in your stuff, it clearly needs to purge more.

exactly.pull your wax as thin as possible to make your vac be more efficient.the thicker the wax is piled up the harder to pull moisture.just my opinion and what works for me.I'm still trying to "dial it in" myself as they say.

 

[cbuts05]

Well if you arnt pulling down to 29hg or near it you may not be able to get real deal shatter. You might be able to make pull snap if youre close to it. I make clear and gold shatter and my temps never go above 115. Its kind of hard to answer your question acurately if you dont know how much hg youre pulling. The best advice i can give you is to get it spread out as thin as possible, keep purging, and keep fliiping your "shatter" over after it stops reacting. There are still large bubbles in your stuff, it clearly needs to purge more.

Maybe that's my problem..it's a 5 cfm pump but only holds vac for 30 mins..I leave it running though..it's full vac idk..just need this to stop..I don't even go near 115

 

[natureboygrower]

Maybe that's my problem..it's a 5 cfm pump but only holds vac for 30 mins..I leave it running though..it's full vac idk..just need this to stop..I don't even go near 115

you said that this happens towards the end of your vac process?I'm wondering if it's happening because you have it under vac too long?this happens to my edges from time to time when I no longer have a reaction when I pull a vac.just a thought.good luck

 

[cbuts05]

you said that this happens towards the end of your vac process?I'm wondering if it's happening because you have it under vac too long?this happens to my edges from time to time when I no longer have a reaction when I pull a vac.just a thought.good luck

Yeah I vac for 12 or more..but y I got bubbles still ?I put it back in..no reaction really

 

[Carolina Dream'n]

Dewax and winterize. Too many fats waxes and lipids to go to shatter.

 

[HydoDan]

Maybe that's my problem..it's a 5 cfm pump but only holds vac for 30 mins..I leave it running though..it's full vac idk..just need this to stop..I don't even go near 115

Yeah I vac for 12 or more..but y I got bubbles still ?I put it back in..no reaction really

Check this out... it may help!
https://skunkpharmresearch.com/bho-extraction/
https://skunkpharmresearch.com/getting-the-green-and-waxes-out-afterwards/

 

[natureboygrower]

Dewax and winterize. Too many fats waxes and lipids to go to shatter.

what are you using to winterize?I can'tget the high test everclear in my state.

 

[Carolina Dream'n]

what are you using to winterize?I can'tget the high test everclear in my state.

everclear that is then distilled to remove the remaining water and impurities.

 

[cbuts05]

Dewax and winterize. Too many fats waxes and lipids to go to shatter.

Don't even know what this means lol...please.help

 

[HydoDan]

Don't even know what this means lol...please.help

https://skunkpharmresearch.com/bho-extraction/
https://skunkpharmresearch.com/getting-the-green-and-waxes-out-afterwards/

 

[purplehays1]

Uh ..yeah ? Into Pyrex dish ..am I not supposed to ?? That's how I seen my buddy do it..lol

wow i hope that was sarcasm, blasting BHO into an electric skillet is going full retard and its a miracle u havnt burned urself or ur kitchen up by now.

Butane shouldn't be used near any heat or electric source, if you are stupid enough to use the stuff inside you better have it away from any electric appliances/motors.