Club 600

DoobieBrother

DoobieBrother

Well-Known Member
Was a balmy 60f today when I went to Lowes home center to get some 6mm all-thread and 1/2"o.d. aluminum pipe to make a pair of 3" tall risers for the ninja's mirrors, which, as they sit, give a GREAT view of my knuckles and elbows & shoulders, but not much in the way of what's behind me.
So will be cutting 4@ 3" long sections of the pipe and will inject silicone into them with the all-thread bolts in place, after cutting the all-thread to the proper length.

IMG_0294.JPG
IMG_0295.JPG
IMG_0298.JPG
IMG_0300.JPG

Will paint them black enamel and will bake it on at 350f
IMG_0301.JPG


And had a helper when I got home...

IMG_0302.JPG
 
AlphaPhase

AlphaPhase

Well-Known Member
So I think I figured a sure fire way to tell if a bulb needed replacing. Take a pick with your camera (if you have magnetic ballasts) and if there's hardly any black lines, then it's time to replace. When a bulb is good you have to stand back at least 10 feet to get the lines to disappear, I took this pick right in front of the tent with out filtering it through sunglasses.
 

Attachments

machinegreenkelly

machinegreenkelly

Well-Known Member
Does this sound reasonable? 15 plants in two 3'x'6' flood trays, using two 8 bulb t5 lights for veg and then 2 600w HPS combined with the t5's for full spectrum flower? The only issue I am having is how to setup the light so the t5s do not block the 600w's, while getting the most out of the t5 lights. I feel that it may be necessary to use another 600w for full light coverage during flower. Any thougts from the pros is always appreciated. Thanks.
 
jimmer6577

jimmer6577

Well-Known Member
Man this moves at a fast pace. I don't have enough time to catch up right now but wanted to pop in and say I have been offered the job to run the Maint. Department all have to do is pass the background check and physical Wed morning. The background check is going to be ify depending on what they are looking for. As long as it's stealing or violence I'm golden because I don't steal or beat shit. Peace got to run.
 
Enwhysea

Enwhysea

Well-Known Member
Good luck jimjim you got this bro.

Guys I have a big issue so I had been using a spare bathroom for a veg room for about two weeks and a few days ago I got some equipment back from a buddy and decided to go back to my tent to veg. I had a 250w MH and a aerogarden a small fan and a airpump plugged into and extension cord which was plugged into a outlet in the bathroom without one of those test/reset buttons well I unplugged the extension cord and when I plugged it back up no power was coming out the outlet I went to my breaker and flipped all the switches and now that bathroom doesn't work along with my master bathroom. Is there anything you guys could rexommend me (besides electicuting myself)?
 
O

oldman60

Well-Known Member
jimmer6577 said:
Man this moves at a fast pace. I don't have enough time to catch up right now but wanted to pop in and say I have been offered the job to run the Maint. Department all have to do is pass the background check and physical Wed morning. The background check is going to be ify depending on what they are looking for. As long as it's stealing or violence I'm golden because I don't steal or beat shit. Peace got to run.
Click to expand...
Luck to you jimmer we're all pulling for ya!:clap::clap:
:peace:
 
You must log in or register to reply here.
Top