When do I cut

Gstoll · Dec 22, 2019

I’m at 8 weeks of flower today I don’t have a microscope to check tris I read it’s ready to harvest after most pistols change but this shit keep growing new after more then half are red now so my question is what is the best way to tell when to chop I’m growing white widow

FYI only one of my plants smell funky asf rest just smell like fruit reasons for this?

there is a lot of threads about this but I just fell like this white widow is fucking with me by growing new hairs non stop

Gstoll · Dec 22, 2019

Here is few pics without lights but also any help on what you see wrong helps me alot

f series · Dec 22, 2019

When in doubt, let that bitch go til you see a banana lmfao

I think your light intensity or heat may be to close/ hot, that plants pushing fresh pistols, or it looks like it to me. Foxtailing perhaps?

Lordhooha · Dec 22, 2019

Gstoll said:
Here is few pics without lights but also any help on what you see wrong helps me alot

2 to 3 weeks at least

Renfro · Dec 22, 2019

She needs more time IMO, so you have time to obtain a scope.

Renfro · Dec 22, 2019

It's ripening time so I would reduce light intensity, drop temperatures and reduce CO2 enrichment if using it.

Renfro · Dec 22, 2019

and if you have a metal halide, now is the time to use it for some frost enrichment.

Gstoll · Dec 22, 2019

f series said:
When in doubt, let that bitch go til you see a banana lmfao

I think your light intensity or heat may be to close/ hot, that plants pushing fresh pistols, or it looks like it to me. Foxtailing perhaps?

I’m using leds and they’re at the ceiling now I’m almost completely out of all my leaves so idk how much more growing I will get but yea

Renfro · Dec 22, 2019

Gstoll said:
I’m almost completely out of all my leaves so idk how much more growing I will get

you don't "need" the leaves anymore. the bud itself is what is growing. All the leaves are really doing now is providing up stores of nitrogen to the ripening bud so I wouldn't remove any that still have green. Compare that bud pic to it in a couple weeks and see the difference as calyxes should be more swollen and more trichomes should be present.

Gstoll · Dec 22, 2019

Renfro said:
you don't "need" the leaves anymore. the bud itself is what is growing. All the leaves are really doing now is providing up stores of nitrogen to the ripening bud so I wouldn't remove any that still have green. Compare that bud pic to it in a couple weeks and see the difference as calyxes should be more swollen and more trichomes should be present.

Ok thanks man I’ll snip then tonight.
So I stoped nutes like last week should I give them more or just continue, my last feed was like 1700 ppm so I gave them a heavy feed I’m down to 700 in my soil now, with my tap water being 230.

Renfro · Dec 22, 2019

1700 PPM at what conversion from EC?

I feed right up to chop, just make sure it's the right stuff for ripening. Not too much phosphorous or nitrogen. Everyone has their own ways and thats mine.

Gstoll · Dec 22, 2019

Renfro said:
1700 PPM at what conversion from EC?

I feed right up to chop, just make sure it's the right stuff for ripening. Not too much phosphorous or nitrogen. Everyone has their own ways and thats mine.

I have done the feed to chop but it always taste funny maybe the organic taste hell if I know but yea what is ec ‍Btw and I just trimmed them up now trying to get fingers unsticky

Lordhooha · Dec 22, 2019

Gstoll said:
I have done the feed to chop but it always taste funny maybe the organic taste hell if I know but yea what is ec ‍Btw and I just trimmed them up now trying to get fingers unsticky

Prob taste bad due to over feeding, improper everything and being underdeveloped.

Renfro · Dec 22, 2019

1700 PPM is very strong if at the 0.5 scale. If at the 0.7 scale then it's still stronger than I would want, regardless of overhead PPM. With 230 PPM in the water to start I would be curious how much of that is calcium and or magnesium as that could be redacted from the feed inputs on future runs. Hard to tell much about the plants under the blurple lighting but WTF is going on with the top of that one nug in the first pic, right side?

Renfro · Dec 22, 2019

Is it some sorta fasciation?

Gstoll · Dec 22, 2019

Renfro said:
1700 PPM is very strong if at the 0.5 scale. If at the 0.7 scale then it's still stronger than I would want, regardless of overhead PPM. With 230 PPM in the water to start I would be curious how much of that is calcium and or magnesium as that could be redacted from the feed inputs on future runs. Hard to tell much about the plants under the blurple lighting but WTF is going on with the top of that one nug in the first pic, right side?

Idk I call him my rebel bud he had a reverse Mohawk all the way up till last week and I don’t have a lot of magnesium that is the one thing I had to feed a lot of this grow

When do I cut

Gstoll

New Member

Attachments

Gstoll

New Member

Attachments

f series

Well-Known Member

Lordhooha

Well-Known Member

Renfro

Well-Known Member

Renfro

Well-Known Member

Renfro

Well-Known Member

Gstoll

New Member

Renfro

Well-Known Member

Gstoll

New Member

Renfro

Well-Known Member

Gstoll

New Member

Attachments

Lordhooha

Well-Known Member

Renfro

Well-Known Member

Renfro

Well-Known Member

Gstoll

New Member

Attachments

Similar threads