under current dwc.
- Thread starter bdt1981
- Start date
bdt1981
Well-Known Member
Weell the instructions show it as part 1 but on the description where it has parts it comes with it says 8 gallon growth modules but nothing about the epi. Guess i woll try to email them
bdt1981
Well-Known Member
because in no way could I or anyone else build the same product. im down with diy but there is no way it is worth building for the quality of product cch2o offers
redi jedi
Well-Known Member
LOL...Anyone could build an undercurrent knock off for 1/4 the price. The only component that is hard to find is the new black 8 & 13 gal modules. Actually its not hard if you want to buy a trailer load of them.
Metasynth
Well-Known Member
Or you could just use totes? The ruffneck black ones are great, and I think they make a 10 gallon.
Metasynth
Well-Known Member
The List
14 Reservoirs, preferably 8 gallons-ish, with lids
28 2" Uniseals...Contacted a guy on craigslist about buying 28 brand new 2" uniseals, offered 45 bucks, we'll see what he comes back with.
Schedule40 PVC, 2", probably aroud 30 feet or so
8 2" PVC elbow fittings
2 2" x 1" "T" fittings
2 1" "T" fittings
2 1" ball valves
15-20 feet of 1" or 3/4" tubing
2 Return pumps, around 600GPH each
2 Float valves
1 55 gallon freshwater reservoir, or directly connected RO/DI Unit or Tallboy filter
Airline Tubing
14 Airstones
1 Badass Industrial air pump, or 2 regular industrial aip pumps
12 Five or Six inch netpots
50L Hydroton
Possibly a chiller down the line, depending on room temps.
Thanks for reading guys!
14 Reservoirs, preferably 8 gallons-ish, with lids
28 2" Uniseals...Contacted a guy on craigslist about buying 28 brand new 2" uniseals, offered 45 bucks, we'll see what he comes back with.
Schedule40 PVC, 2", probably aroud 30 feet or so
8 2" PVC elbow fittings
2 2" x 1" "T" fittings
2 1" "T" fittings
2 1" ball valves
15-20 feet of 1" or 3/4" tubing
2 Return pumps, around 600GPH each
2 Float valves
1 55 gallon freshwater reservoir, or directly connected RO/DI Unit or Tallboy filter
Airline Tubing
14 Airstones
1 Badass Industrial air pump, or 2 regular industrial aip pumps
12 Five or Six inch netpots
50L Hydroton
Possibly a chiller down the line, depending on room temps.
Thanks for reading guys!
redi jedi
Well-Known Member
Metasynth
Well-Known Member
That's a list for two separate 6 module systems, both with epi's.
Epicenter comes w any full undercurrent system. Plus air pump, water pump, etc. If you get a bare bones kit it's just buckets and piping. I did the DIY version, but went w undercurrent for the bulkheads. Don't get the kit w the uniseals... Go w the bulkheads, no leaking, no lining to put together, no bs or frustration. The bulkheads have 3 seals. (2 o ring and a flat washer) well worth the extra $ if going DIY. Oh and the newer undercurrent buckets are black, that's the kits w the bulkheads.
Meta, don't skip on a chiller. It'll save you a ton of headaches. You need lots of disolved oxygen, you ghet that w the right res temp. I setup 2 systems and use wort chillers ( a home brew item) daisy chained together so i can have 1 chiller doing both systems. Plus you need to plan on either a sterile res. or a bacterial one. You'll find guys w opinions on both schools of thought.
