Temperature and humidity problem! Help please

georgethecat

Active Member
I have all my buds hang drying nicely in a dark room but my temp and humidity I feel might cause some problems. The temperature ranges from 65-70 degrees (I have an AC on as well) and the humidity ranges from 55-60. Is that a problem? Are there any ways to dehumidify the room without buying a hundred dollar dehumidifier? Any and all info would be a help. Thanks.
 

Attachments

  • PICT0039.jpg
    PICT0039.jpg
    81.7 KB · Views: 46
  • PICT0042.jpg
    PICT0042.jpg
    85.1 KB · Views: 55
  • PICT0045.jpg
    PICT0045.jpg
    61.5 KB · Views: 69
your temps are fine, but i would shoot to bring your humidity down to 30-40 range if you can. lower humidity is better to avoid mold issues as you propably know. But getting it too low can give you probs aswell.
 
got the temp at 65humidity down to 50-55% depending on time of dayshouldnt cause big problems but i still check regularlyid love to get it down moregot a few cheap closet dehumidifiers in there, hope it will lower some moreonly 3-7 days left before i start jar curing
 
Your humidity is fine. One more important thing you should have light air flow. It helps the buds from getting mold. Keep it light and don't hit the buds direct. I don't know where your A/C is but this is the best thing to control humidity. If you go with dehumidifiers your adding heat then! Go with what you have now and try getting the air to regulate the humidity if you can. Good luck
 
nah i would still say 60 is too high for humidity during drying. all the research i have read on a slow drying process doesnt recomend a humidity anywhere near 60% but you got it down, just roll with that but keep an eye out molding can creep up on you.
 
Back
Top