Super Grow and need some Help!!!

Ok i'm wanting to setup up a grow room in a 10x10x8 room. What are your suggestions as far as what kind of lighting, intake, exhaust or sealed. Also how many plants can i put it that area. I'm used to growing about 5 girls in DWC so looking to upgrade massively. I'm not really familiar with Ebb&Flow but i know i don't want to grow in soil. Please any and all help would be great. Also thinking about a perpetual grow. Would like to hear everyones opinion.

Any one have any ideas i'm racking my brain Just need to know what i need for something this big

i would suggest 7-8 600w HPS lights, with flood/drain tables, it will be simpler than DWC on this scale, more heat resistant and fool proof. i would put 6-8 plants per light not to lose time vegging. perpetual is good but you need a seperate area for veg and clone. have 1 table harvested at a time, don't put plants in different growth stages in the same tray with same ferts. that's how I would do it so....

Thanks for the help.. Sounds like the way in going to go then. Do you think i should use Co2 in an area like this.

CO2 is a very personal choice, i wouldn't use it for its cost and trouble but many would do it. however if you're still new, get your room fully dialed get some experience then consider it. you will need a controller and meter, very pricey on this scale. you will also have to add A/C since room has to be sealed to use CO2. anyway you will probably have to use A/C with this much light depending on temps, get the aircooled hoods thats a must