Squarepushers *easiest* Aeroponic Cloner

I think this is super easy, the easiest aeroponic cloner I can think of



Start with a tote bucket, preferably light proof and descent size.




Here what it looks like inside with the lid off


Pump hooked up directly to 1/2 Poly tubing


End cap for poly tubing


Pump and poly tubing fitted inside bucket (can rearrange slightly later exact position)


1/4 poly hole punch, and 1/4 x 1/2 connector


Punch holes into the Poly tubing


punching


notice 1/4" hole

fit in 1/4 connector

heres my misters nad 1/4" tubing

Mister threaded into 1/4" poly tubing, connected to 1/2" poly

do the same thing with the rst of them

all 5 on now

fit it in the bucket, arrange how you want your misters to point, and you are gtg

picture of the pump hooked up to the misters and tubing only


there ya go! unfortunately, my home depot misters were rather fail, so they weren't misting like they were supposed to. Working on getting some good misters then will post 'in action' pics.

Thanks for watching!



EDIT: These are the misters I am going to try next

http://shop.ebay.com/mauibuilt_products/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p4340