something wrong with my gdp clone, advicehelp please 1000w, granddaddy purple

eastoaksav6500

Well-Known Member

Attachments

  • CIMG5696.jpg
    CIMG5696.jpg
    62.5 KB · Views: 30
  • CIMG5695.jpg
    CIMG5695.jpg
    84.5 KB · Views: 14
  • CIMG5683.jpg
    CIMG5683.jpg
    92.3 KB · Views: 20
Put some domes over them and raise the humidity!! Quick! they be way to young to be acclimated to full lighting conditions. Hurry!! you havent much time.
 
what is a humidity dome? my humidity is at 46%, im thinking im jut going to buy a humidifier...? my 1000w light is about 20in above the clones...are they looking bad?
 
temporarly you could water them, them put some syran wrap over them, but soon as they perk up they may be too tall but it may work for a little bit? Good luck man
 
its needs to b close to 100% and yes ther looking bad this is wut i did good luck hommie:spew:
 

Attachments

  • 1114080007.jpg
    1114080007.jpg
    93.4 KB · Views: 18
  • 1114080007a.jpg
    1114080007a.jpg
    72.6 KB · Views: 14
that pik was right after they wer cutt so u cant see the water on the dome that lets me kno that the humi is good
 
what is a humidity dome? my humidity is at 46%, im thinking im jut going to buy a humidifier...? my 1000w light is about 20in above the clones...are they looking bad?


A friendly suggestion the light may be to intense your using a 1000w is a lot for those babies. i only use one 4' florescent till they root then gradualy adapt them such intense light.
 
Clones and young seedlings need LOTS of humidity to get a good start. 100% humidity is not uncomon. Watering will only drown the little beasties. Enclose the tops of your pots with a container of some kind. Even tupperware. With those 1K watt lights, tupperware will reduce the light and heat produced and give the little ones a chance to acclamate to the new larger pots. Mist the inside of the tupperware container to instantly raise the humidity quick, and place it over your clones. Got my fingers crossed for ya.

Nim
 
yeah baby plants like yours need at least 60-70 % humidity. best is around 90 but for now u need to get those guys some coverage like everyone else is sayn. best of wishes to ur babies
 
hey fellow growers i just took some pics of my gdp clones, some of them look normal, and some of them have a thin light green/yellow color to them...I JUST WATERED TODAY WITH JUST OVER A 1/4 GALLON FOR EACH PLANT. I USED ADVANCED NUTES SENSI A AND SENSI B GROW WITH THE WATERING. I DID NOT CHECK MY RUN OFF, BUT I USED WATER WITH A PH OF 6.2 , ANY THOUGHTS? TIPS? COMMENTS? VERY MUCH APPRECIATED!!!
 

Attachments

  • CIMG5765.jpg
    CIMG5765.jpg
    61 KB · Views: 0
  • CIMG5773.jpg
    CIMG5773.jpg
    73.1 KB · Views: 0
  • CIMG5781.jpg
    CIMG5781.jpg
    58.4 KB · Views: 0
spray em, i dont use a dome, just t5 lights and spray 2 times a day. it looks like the clone hase not even rooted yet. you need to use rockwool. late
 
they were in rockwool....i hope they survive what are my chances that they will? ive been keeping the ph at about 6.2...only spray during dark hours right??????
 
drop to 5.5 or so on ph, and they have a good chance of making it if you give them the proper care (i have seen worse). late

ps. also make sure it is not too cold in there, because this will impede growth.
 
Back
Top