Royal Queen Euphoria CBD - 200w LED DIY box

CornerStone

CornerStone

Well-Known Member
Hello Everyone :leaf:

I'm about to start a new grow and I would like to share with you my first steps.

I'm building a small wood box (40cm x 60cm x 125cm). Trying to keep as much stealth as I can, will put some 2x Akasa Viper 120mm computer fans for intake and 2 140mm for outake. Their max airflow is 109.55 CFM so I think this will be pretty good air change inside this small tent. They are also really quite 21.7 dB maximum!

I will put 2 plant inside this box.

So, here are the first pictures of the box that Im building:

Cutted pieces


Assembled


With the door on


After painting. I choosed white paint because is really hard to find mylar here where I live(Brazil) and I didnt want to use foil because it conducts electricity


the view of my kitchen...


I made this box to avoid the light coming on and out through the fan's holes


2x 140mm Cougar fans for outtake (around 140 CFM for both)


These are my plants with one week since they sprouted. The strain is Royal Queen Seed Euphoria CBD (feminized)





I cutted a hole in the box and put this 200w LED that I buyed from ebay. This keeps the heat out of the box.


This is the final set up. Later I will figure it out how to move the plants up and down since the lights stay at the top. Maybe Im gonna use some piece of wood and chains.


What you guys think?
 
CornerStone

CornerStone

Well-Known Member
KrazyG said:
Very similar to my cab just a little smaller and alot neater than mine. What air filtration do you use?
Click to expand...
Acttualy Im not using carbon filters yet. I buyed some small carbon filter that I can put outside the box, Just wainting for the delivery. I can post some pictures after
 
CornerStone

CornerStone

Well-Known Member
Just a quick update:

Water the babies today, they are in 5 liters pots and they are taking 6-7 days to dry out nicely.

Later I will post some picture of them with 2 week since sprouted.
 
CornerStone

CornerStone

Well-Known Member
Its been 3 weeks since the girls sprouted. 6 days ago after coming back from a weekend trip I notice that the plants was showing some signs of nutrient burn. Flushed both and 3 days after the burning stoped. After that, 2 or 3 days I notice that the flush took almost all nutriens that have left on soil and the plants was start to fade a little bit.
So a water with 150ppm of Biothrive grow and 100ppm of cal-mag.

2 days passed and the new grow seems to be good. What you guys think?

plant 1:


plant 2:


Any sugestions?

Thanks!!!
 
weedhead24

weedhead24

Well-Known Member
CornerStone said:
Hello Everyone :leaf:

I'm about to start a new grow and I would like to share with you my first steps.

I'm building a small wood box (40cm x 60cm x 125cm). Trying to keep as much stealth as I can, will put some 2x Akasa Viper 120mm computer fans for intake and 2 140mm for outake. Their max airflow is 109.55 CFM so I think this will be pretty good air change inside this small tent. They are also really quite 21.7 dB maximum!

I will put 2 plant inside this box.

So, here are the first pictures of the box that Im building:

Cutted pieces


Assembled


With the door on


After painting. I choosed white paint because is really hard to find mylar here where I live(Brazil) and I didnt want to use foil because it conducts electricity


the view of my kitchen...


I made this box to avoid the light coming on and out through the fan's holes


2x 140mm Cougar fans for outtake (around 140 CFM for both)


These are my plants with one week since they sprouted. The strain is Royal Queen Seed Euphoria CBD (feminized)





I cutted a hole in the box and put this 200w LED that I buyed from ebay. This keeps the heat out of the box.


This is the final set up. Later I will figure it out how to move the plants up and down since the lights stay at the top. Maybe Im gonna use some piece of wood and chains.


What you guys think?
Click to expand...
its pretty cool buddy not very wide though
 
You must log in or register to reply here.
Top