Questions about lighting this space

Hi guys,

Attached is my plan for my new room.

I have the following...
Flower room:
2 boards with 3 quantum 288 boards. (6 boards in total.
6 vero 29 3500k. These are the model c variant which is 69v each
2 x hlg 480h-c2100a that are powering the qb panels. And potentially 1 of the Vero's each.

In the mother and clone I have 2 5000k vero 29 se's that are about 35v each

Here are my questions...
There are 4 extra Vero's that I don't have power supply for yet.... Are they overkill anyway.? (or could I light more space?)
If not, how can I power 4 vero 29s? I can't seem to find a big enough driver.


For the flower room, the se's suggested current is 2100ma. Will that be overkill for mother and clone? Could I get away with lower and if so what would you suggest?

Thanks for any tips on this. It will be my 1st grow in a while, and first ever led grow.

So your lighting up a 1,2m x 2,4m space?

I wouldnt run the veros with the boards at 2100ma, . Do you already have the drivers? makes it awkward to match it all up with them.

Id use..
hlg480/2100 4 qb288
hlg240/2100 2 qb288
2x hlg320/1400 6 vero 29c

key4 said:

So your lighting up a 1,2m x 2,4m space?

I wouldnt run the veros with the boards at 2100ma, . Do you already have the drivers? makes it awkward to match it all up with them.

Id use..
hlg480/2100 4 qb288
hlg240/2100 2 qb288
2x hlg320/1400 6 vero 29c

Click to expand...

Yes 1.2 m by 2.4m for flower and a 1x1m for mothers and clones.

I already have all the Cobs and boards, and 2 of the 480 drivers. Happy to buy more drivers. I have plenty of time. What would you recommend for the 2 vero 29 she's for veg... What drive current?

ANC said:

Click to expand...

Not quite that bad. You like trolling don't you!

Naah. But I post funny shit in the morning as my meds wear off.