Airwalker16
Well-Known Member
...Not to mention headaches.
Ppm
- Thread starter Kindbuds303
- Start date
Renfro
Well-Known Member
Well he had them at 820. Personally mine would be starved at less than 1000 PPM during flower but I have intense light and co2.
Kindbuds303
Well-Known Member
600? I don’t have a burn in sight why would I go down if I had I 820 and ppm is dropping
Renfro
Well-Known Member
Totally agree.
Renfro
Well-Known Member
I think you are fine at your 800. They don't look burnt from it.
Kindbuds303
Well-Known Member
like I said one plant and was an trial phase before I ran my good seeds this was just a clone from a buddy that said it would prob die cause I have never done dwc and I think I’m doing decent so far
Kindbuds303
Well-Known Member
Kindbuds303
Well-Known Member
This is my system after this plants done
Kindbuds303
Well-Known Member
So much confusing information just trying to soak it all up I’m fucking winging it for most part keep journal and monitor ph ppm and water temp and it seams to be doing me just fine but I admit I have so much to learn and I’m trying to soak it all up thanks everyone who took time out to give advice
Attachments
Kindbuds303
Well-Known Member
I’ll take another picture of buds when I get back from walking dog I’m on day 28
Airwalker16
Well-Known Member
I'd highly suggest you just build your own and not waste that money on their pre built stuff. Its pretty simple to do.
I GOTTA LOSE THE AIR PUMPS! HOW?! Plus my awesome mini DWC :)
That's cool man. Pretty low-key. I think you'll be surprised at the pressure of mine. i can't remember now, but its some where around 5-600 gph
www.rollitup.org
I GOTTA LOSE THE AIR PUMPS! HOW?! Plus my awesome mini DWC :)
That thing is way overpriced. The whole thing sits on a very simple method of splitting the water to oxygen and hydrogen. In big system I’d be worried about the hydrogen gas... I was looking around and saw 2 more very interesting thing. First one called Carmin. I don’t really get how it...
www.rollitup.org
Kindbuds303
Well-Known Member
Won some money on scratch ticket so I bought it at. Deal and I live on a higher floor can’t risk a leak these are tested throughly before sent out I do maintenance so this would of been easy but was already done so I snagged it
Kindbuds303
Well-Known Member
Took some water out put in cup got same reading
I put in some ph down do to being to high and toma I will do full res change here some pics of her now day 28 nothing spectacular by any means but she’s frosty as fuck on inside and smells amazing
I put in some ph down do to being to high and toma I will do full res change here some pics of her now day 28 nothing spectacular by any means but she’s frosty as fuck on inside and smells amazing
Attachments
Kindbuds303
Well-Known Member
Some of the lower sites are lil twisted I think due to not getting enough light I put my t5 4 bulb in for middle/bottom canopy hoping that will help
SnidleyBluntash
Well-Known Member
For speed and ease I use a turkey baster to suck a gulp out of the Rez through a hole in the top and squirt it into a espresso cup, and put the meters in that.
70's natureboy
Well-Known Member
A lot of ppm numbers flying around when nobody on this site has ever checked the calibration of their meters That's why we all TRY to talk in EC now. 800 - 1000 ppms isn't all that strong unless you are talking about half ppm's. All the grow stores sell calibration solution for less than a buck. Your plants do look fine so far kindbuds
Kindbuds303
Well-Known Member
thanks I’m using a Hannah combo at the 500ppm measurement I was using ec but now I just use the ppm I might just switch pen back to ec that’s how I learned anyway thanks man just wanna get her to harvest and next run I’ll have my chiller going bigger buckets and recirculating so crossing fingers thanks man
Kindbuds303
Well-Known Member
404 Not Found | Bluelab New Zealand
Get the most from water-based plant growing systems with the Bluelab pH pens, pH tests, digital soil pH meters & pH sensors.
www.getbluelab.com
Kindbuds303
Well-Known Member
This is what I wAs using 500 scale? That’s right correct
