Powdery Mildew

petert

Well-Known Member
I drench the plants with 1 part skim milk and 9 parts tap water, use a pump type sprayer hitting every part so it drips off. I will spray first thing in the morning so the sun and wind has plenty of time to thoroughly dry it. The plants seem to tolerate it well and I haven't noticed any negative effects other than some dry milk residue dried on the leaves. It does seem to come back so a respray is needed, last spray was over a week ago and haven't noticed it back yet. It is getting closer to harvest and i will be doing a 3 part wash then also with baking soda/fresh lemon juice/tap water then hydrogen peroxide/tap water then rinse thoroughly.
Yeah. I have the milk residue On my leaves too debating whether to do another application or not. I’m probably 2-3 weeks away and we’re forecast for scattered showers the next 2-3 days. Then a week of sun in the mid 70’s to low 80’s.
 

petert

Well-Known Member
OR.....should I just harvest it at this point so it’s not a complete loss? I lost my plant last year to mold/bud rot too :’(
If you’re west of the cascades you’re going to get 3-4 days of showers starting tomorrow. I’m in the eastern gorge so it’s looks pretty light as far as the rains amounts go. How close are you? I’m a least 14-21 days away. So I may spray with milk 1 more time.
 

petert

Well-Known Member
I too am starting to see some mold starting on a few of the leaves on my plant. I’ve attached pictures. Can someone confirm if this is mold? It’s been hard to distinguish between mold and water droplets that have hit ash on my plant. Im fairly certain this is mold though.

should I spray with the 30% milk 70% mixture? If I do this, am I hitting the whole plant? Or would it be sufficient to just keep removing the leaves that get affected? Orrrrr should I just start thinning it out a bit as it’s several weeks into flower and only has two weeks or so left to go. Any advice is really really appreciated. Thanks everyone!
judging from these picks your a ways from harvest. If it were me, I’d spray the milk mixture maybe cut it to 20/80.
Ill be doing the same thing after this weather passes. Next week looks really nice!
 

petert

Well-Known Member
I too am starting to see some mold starting on a few of the leaves on my plant. I’ve attached pictures. Can someone confirm if this is mold? It’s been hard to distinguish between mold and water droplets that have hit ash on my plant. Im fairly certain this is mold though.

should I spray with the 30% milk 70% mixture? If I do this, am I hitting the whole plant? Or would it be sufficient to just keep removing the leaves that get affected? Orrrrr should I just start thinning it out a bit as it’s several weeks into flower and only has two weeks or so left to go. Any advice is really really appreciated. Thanks everyone!
Heres mine. The pic of the leaf is milk residue from my last spraying. We had a shower last week that washed some of it off.
 

Attachments

Iheartoregon

Active Member
judging from these picks your a ways from harvest. If it were me, I’d spray the milk mixture maybe cut it to 20/80.
Ill be doing the same thing after this weather passes. Next week looks really nice!
Yeah I’m west of the cascades. Like stated above, a couple days of showers and then the sun returns. I have a couple questions I’m hoping I can get answers to before the rain arrives tomorrow...

im planning on moving the plants into my covered porch. They’ll stay dry and in the breeze but out of “direct” (there won’t really even be any) sunlight.Would that be okay?

should I spray the plant down now, or wait until the sun is back and can dry it out? I just feel like spraying it down now, with the cool damp weather, is probably the perfect form toform/spread more mold. Thoughts?

lastly, the idea of taking off SOME of the fan leaves made sense.Also, the counter point of fan leaves being your plants nutrient supply and water source makes sense too. All things considered, and fear of my plant being too dense, I clipped some fan leaves today. I’ve attached pictures of what it looks like. Lemme know what you think?

very much appreciate all the help and guidance you all are able to give.

cheers!
 

Iheartoregon

Active Member
Yeah I’m west of the cascades. Like stated above, a couple days of showers and then the sun returns. I have a couple questions I’m hoping I can get answers to before the rain arrives tomorrow...

im planning on moving the plants into my covered porch. They’ll stay dry and in the breeze but out of “direct” (there won’t really even be any) sunlight.Would that be okay?

should I spray the plant down now, or wait until the sun is back and can dry it out? I just feel like spraying it down now, with the cool damp weather, is probably the perfect form toform/spread more mold. Thoughts?

lastly, the idea of taking off SOME of the fan leaves made sense.Also, the counter point of fan leaves being your plants nutrient supply and water source makes sense too. All things considered, and fear of my plant being too dense, I clipped some fan leaves today. I’ve attached pictures of what it looks like. Lemme know what you think?

very much appreciate all the help and guidance you all are able to give.

cheers!
Aaaand here are the actual pictures haha. First two are before and after the fan leave stripping. 70F82321-9474-41A3-BBE7-874B6C1B1B43.jpeg
 

Attachments

petert

Well-Known Member
Yeah I’m west of the cascades. Like stated above, a couple days of showers and then the sun returns. I have a couple questions I’m hoping I can get answers to before the rain arrives tomorrow...

im planning on moving the plants into my covered porch. They’ll stay dry and in the breeze but out of “direct” (there won’t really even be any) sunlight.Would that be okay?

should I spray the plant down now, or wait until the sun is back and can dry it out? I just feel like spraying it down now, with the cool damp weather, is probably the perfect form toform/spread more mold. Thoughts?

lastly, the idea of taking off SOME of the fan leaves made sense.Also, the counter point of fan leaves being your plants nutrient supply and water source makes sense too. All things considered, and fear of my plant being too dense, I clipped some fan leaves today. I’ve attached pictures of what it looks like. Lemme know what you think?

very much appreciate all the help and guidance you all are able to give.

cheers!
Yeah. I have Zero issues with thinning out the worst fan leaves, just don’t overdo it.
im waiting until the weather clears Saturday or Sunday to decide if I need to spray. Then when you’re ready to move them back out into the sun, spray them in the AM. putting them under a porch roof for a couple days won’t hurt them. It’s supposed to clear off by Saturday. So drag them under cover before it rains and pull them back out when it clears. Wait a day and spray.
 

Iheartoregon

Active Member
Your plants are fine. A lot of guys let them go “native”. I prefer to give them a Brazilian and Grimm up the bottom 1/3 of the plant.. but to each his/her own. I just feel you get better airflow by lollipopping.
Awesome thanks for the input.

yeah I kinda let them go back to being native during all the smoke. Didn’t mess with them or give them much nutes. Just let them kinda weather the storm.

I picked off some fan leaves off and might do a bit more in like A week or so, somewhere in the middle of all this nice weather. I’ll also start giving them nutes again and will move them back out into the sunshine. Just gonna keep a close eye with all this moisture and pick off whatever I can on the leaves while it’s raining.

I’ve been in flower for like a month now, maybe a bit more. So I’m thinking by this time in October I should be good. But I might pull them if the weather gets too bad. I’m not too concerned about MAXING my potential, I just wanna get something out of it this season instead of losing everything to mold last year. I’ve been keeping a much better eye on it this year. Here’s to a dry October!

and thanks for your input man, I appreciate it. I’ll update again after the rain!
 

petert

Well-Known Member
Awesome thanks for the input.

yeah I kinda let them go back to being native during all the smoke. Didn’t mess with them or give them much nutes. Just let them kinda weather the storm.

I picked off some fan leaves off and might do a bit more in like A week or so, somewhere in the middle of all this nice weather. I’ll also start giving them nutes again and will move them back out into the sunshine. Just gonna keep a close eye with all this moisture and pick off whatever I can on the leaves while it’s raining.

I’ve been in flower for like a month now, maybe a bit more. So I’m thinking by this time in October I should be good. But I might pull them if the weather gets too bad. I’m not too concerned about MAXING my potential, I just wanna get something out of it this season instead of losing everything to mold last year. I’ve been keeping a much better eye on it this year. Here’s to a dry October!

and thanks for your input man, I appreciate it. I’ll update again after the rain!
yeah. That’s my plan of attack. Mine are in raised beds and I’m not going to cover them. I’m hoping to hold out until the 2nd week of October. But we shall see. If the weather gets really shitty I’ll yank the any time after 10/1
I just have my girls their last nutrient watering, They’re in great soil and they can get what they need from that.
 

Iheartoregon

Active Member
yeah. That’s my plan of attack. Mine are in raised beds and I’m not going to cover them. I’m hoping to hold out until the 2nd week of October. But we shall see. If the weather gets really shitty I’ll yank the any time after 10/1
I just have my girls their last nutrient watering, They’re in great soil and they can get what they need from that.
Yeah mine are in good soil as well. Don’t you typically want to stop giving them nutes like two weeks before pulling them?

and It sounds like we’ve got similar game plans going. Hope you’ll stick around and we can share experiences!
 

Iheartoregon

Active Member
Also,
Yeah mine are in good soil as well. Don’t you typically want to stop giving them nutes like two weeks before pulling them?

and It sounds like we’ve got similar game plans going. Hope you’ll stick around and we can share experiences!
also, what strain are you growing?
 

Kid212

Active Member
I used dish soap and water diluted in a spray bottle. The spores came back the very next day. I'm going to try milk this time. Diluted Apple cider vinegar doesn't seem to work either.
 

Attachments

MICHI-CAN

Well-Known Member
What I've done is use peroxide sparingly and perform an act of charity

Preparations of potassium bicarbonate reportedly work pretty well although I've never tried it
Random acts of kindness work wonders in the karma dept. I'm convinced that absolute coverage of treatment is crucial. Never had a problem beating PM with smallish plants and consistent preventive measures. This year I grew an overcrowded jungle and nothing worked until I broke out my airless paint pump and a full face respirator. Blows my Hudson fogger away. Hand pumps and electric sprayers are a pointless waste of time and resources. More eficient as well. Using 1/3 the solution to get full coverage in the same sq ft. Prevention and full coverage. Good luck people.
 

TurboTokes

Well-Known Member
h202 spray, I use it and it works amazing, very economical if you buy the 35% and dilute. I hose the plant down with a cheap $10 pump sprayer, no need for an airless paint gun and hazmat suit unless youve got a field to dust, works perfect I can do a 6 foot tall BUSH of a plant in 3-5minutes.

If Ive had trouble with a plant late in flower with signs of mildew, I will also dunk the buds in h202 in a tote when harvesting and hanging to start drying, just as Jorge Cervantes advises
 

Jimbo the Gael

Well-Known Member
I used Green Cure (mostly potassium bicarbonate with some surfactants) and it worked really well on the powdery mildew. If you use it at full strength during flower it'll turn your pistils brown, but the new ones growing in are unaffected. Doesn't cause any problems with flowering other than that. Had a couple of clones two years ago, one was too close to the tomatoes and got some PM. First time I used Green Cure so I used it full strength and all the pistils went brown. Couldn't tell the difference between the buds after harvest without looking at the jar, smoked the same, same potency.
 
Top