HukedNKronik
Member
Looking to get some advice. I have a grow that I desperately want to finish, however I have powdery mildew. I have heard a few solutions, but I like to get answers from more than one source.
I have two 240W tents with 9 plants in them each. 18 total. My RH is never above 25%, and the tempratures is usually in the 80's. I'm using a bucket system/ebb and grow system and using hydroton as a medium with 1000 watters in both with HPS. I water twice a day, and once or twice a day I am trimming off any signs of powdery mildew. I'm pretty sure that the problem occured after it went into flowering. I didn't had the finances to take care of it before flowering. I am trying to take as many effective measurements as possible without using chemicals, and whatever will decrease the amount of trimming that I am doing. I want the buds to get as much photosynthesis as possible.
I did however buy Ed Rosenthal's Zero Tolerance Fungicide, and have been spraying it on a paper towel and am dabbing/wiping off any powdery mildew that I find on the stalks and nodes. Today I took a few additional steps. 1. I made a 25% Bleach solution and sprayed it onto a paper towel, and wiped down the walls of the tent. I plan on doing this once or twice a week from here on out. 2. I went out and bought a HEPA filter. I'm alternating it between the two tents every couple of hours when the lights are on. I am also leaving it in whichever tent overnight, and I leave it on the whole time. I did turn off the fans in the tents however, as I have heard that this can exasperate the problem. I turned them off before wiping down the walls or buying the HEPA filter.
One thing that I did hear is to go out and buy Hydrogen Peroxide with a 3% solution, and add 6 to 8 ounces of it per 5 gallons, and to spray the plants in their current state. I also heard to do the same thing after harvest time, only to soak each cutting for up to 5 minutes each. Then to leave them in front of a fan to dry off the excess water so it will prevent new mold/bud rot. I am concerned with this method though. Would spraying the H2O2 solution on my plants affect the taste of the final product? Would it make it more susceptable to bod rot or new mildew? If I do decide to spray it with this solution, should I turn the fans on? Another thought...I heard that spraying the plants with Perrier will also greatly help as a foliar spray seeing as how it helps by also containing CO2...what if I was to mix the hydrogen peroxide with Perrier? I mean it's basically adding Carbon Dioxide with Hydrogen Peroxide. I don't know what kind of reaction my plants would have. If anyone has tried this, I'd love to hear back about results.
Any help would be much appreciated!!
I have two 240W tents with 9 plants in them each. 18 total. My RH is never above 25%, and the tempratures is usually in the 80's. I'm using a bucket system/ebb and grow system and using hydroton as a medium with 1000 watters in both with HPS. I water twice a day, and once or twice a day I am trimming off any signs of powdery mildew. I'm pretty sure that the problem occured after it went into flowering. I didn't had the finances to take care of it before flowering. I am trying to take as many effective measurements as possible without using chemicals, and whatever will decrease the amount of trimming that I am doing. I want the buds to get as much photosynthesis as possible.
I did however buy Ed Rosenthal's Zero Tolerance Fungicide, and have been spraying it on a paper towel and am dabbing/wiping off any powdery mildew that I find on the stalks and nodes. Today I took a few additional steps. 1. I made a 25% Bleach solution and sprayed it onto a paper towel, and wiped down the walls of the tent. I plan on doing this once or twice a week from here on out. 2. I went out and bought a HEPA filter. I'm alternating it between the two tents every couple of hours when the lights are on. I am also leaving it in whichever tent overnight, and I leave it on the whole time. I did turn off the fans in the tents however, as I have heard that this can exasperate the problem. I turned them off before wiping down the walls or buying the HEPA filter.
One thing that I did hear is to go out and buy Hydrogen Peroxide with a 3% solution, and add 6 to 8 ounces of it per 5 gallons, and to spray the plants in their current state. I also heard to do the same thing after harvest time, only to soak each cutting for up to 5 minutes each. Then to leave them in front of a fan to dry off the excess water so it will prevent new mold/bud rot. I am concerned with this method though. Would spraying the H2O2 solution on my plants affect the taste of the final product? Would it make it more susceptable to bod rot or new mildew? If I do decide to spray it with this solution, should I turn the fans on? Another thought...I heard that spraying the plants with Perrier will also greatly help as a foliar spray seeing as how it helps by also containing CO2...what if I was to mix the hydrogen peroxide with Perrier? I mean it's basically adding Carbon Dioxide with Hydrogen Peroxide. I don't know what kind of reaction my plants would have. If anyone has tried this, I'd love to hear back about results.
Any help would be much appreciated!!