Potpourri (Lemon Amnesia, White Widow, Critical Mass) - LED/Hydro Grow

Bluezdude

Well-Known Member
Yesterday I cut my White Widow and got rid of 600W (plus losses and cooltube fan) of electrical consumption. After a few hours of work my tent was transformed and the young ones waiting in the bathroom under 4 panels (96W) for five weeks, took their final place, under 6 panels (144W)

We will consider yesterday, 18th of March the first day under 12/12. I plat to axe them in 10 weeks time at about the 27th of May.

A general view
2013_0319AA_zps407a8c73.jpg


Those are some young ones I didn't want to throw away and noone wanted to take them. We got 3 White Widows and the one on the low left corner is an Amnesia Lemon.
2013_0319AB_zps96ad8f92.jpg


Over here we got the following. At the back, 2 Amnesia Lemon; in the middle, on the left we got a third Lemon and on the right a Widow; on the front we got a Critical Mass and on the right yet another Widow (had plenty of clones :-P ) All of the plants undertook some kind of training (topping, LST, etc)
2013_0319AC_zps528c85a5.jpg


The system works quite easy. Water comes in
2013_0319AE_zps2ec6c206.jpg


Water comes out
2013_0319AD_zps17f268b1.jpg

Yeah I know, transparent tube. I'll change it if I can be arsed :D

And closing with another perspective
2013_0319AF_zps91629df8.jpg


I will be trying to do weekly updates but I'm kind of a lazy fuck sometimes, I hope you can empathize, so nothing is guaranteed :D

Be well lads and lasses, thank you for reading
 
About 6 litres each, gallons depends if you want US or imperial :p (1.58 - 1.32)
But doesn't matter as the design is not to allow water to stay in the bucket but to constantly circulate it. I allowed only about 1/2 a litre to remain in each bucket to protect against a pump failure; it will provide the necessary moisture for the plant to stay alive for some hours.
 
Finally the panels got the place they deserve in the tent :P Flo the hell out of the girls :)
Yeah, and it's so much easier to take pictures ;) This is how things look like at the moment
2013_0323AI_zps219730da.jpg
It's been five days now and they have adjusted in their new environment. The small ones
2013_0323AA_zps7ed49276.jpg
Lemon Amnesia 1
2013_0323AB_zps7de5217f.jpg
Lemon Amnesia 2
2013_0323AC_zps63b6b8c8.jpg
Lemon Amnesia 3
2013_0323AD_zps5577bb5c.jpg
White Widow 1
2013_0323AE_zpsa65acc98.jpg
Critical Mass
2013_0323AF_zpsdc35cf83.jpg
White Widow 2
2013_0323AG_zps409ed4b3.jpg
And a final pic
2013_0323AH_zps06d0591a.jpg
 
I have added another four panels (ten in total now) reaching 240 Watts.

2013_0403AA_zpsd627afe6.jpg


This is how I got em clustered. Two rows of 3 panels each on the sides and one with four in the middle.
2013_0401AC_zps08569d8f.jpg


The Lemon Amnesia is taking the lead being the fastest to start budding
2013_0403AF_zps4af8330b.jpg


The thick stems on the left belong to the Critical Mass, it shows quite promising
2013_0403AE_zpsbbebc6ae.jpg


Now that flowering has begun I'll try to be more punctual at updates to show the progress. To tell the truth from the widows I don't expect that much, I was a bit unsatisfied with the results of my previous grow and these are clones of that plant, but at least the taste makes up for the lesser yield.
 
So it's been three weeks already and I'm four plants down. I sacrificed the widows, kept only one, so now I'm down to 6 plants in total, 4 Lemon Amnesia, 1 Critical Mass and 1 White Widow. I really didn't like having roots in the reservoir so I just took the Lemon from there, transplanted it where Widow #2 used to be. I also had some spots that could be signalling Pythium problems. So I also sterilised everything I could.

Also I changed my nutes. My ph-meter has been going nuts lately and I wanted to give the Advanced Nutrients a go, so now I'm using their 3-part series along with Big Bud. Their supposed to be ph perfect, i.e. no need to adjust ph at all, so what the hell.

This is how things look like at the moment
2013_0407AA_zps5e00bb74.jpg


At the back I got 2 Lemons, in the middle-left is the Critical Mass and on the right the Widow. On the front the remaining two Lemons.
2013_0407AB_zpsa7aabfba.jpg


Lemon #1
2013_0407AC_zps8763a9c2.jpg

2013_0407AD_zpsc74a45a4.jpg



Lemon #2
2013_0407AE_zps41cacd24.jpg

2013_0407AF_zps40efe3d7.jpg


Critical Mass
2013_0407AG_zps7fa1ef55.jpg

2013_0407AI_zps68950045.jpg


White Widow
2013_0407AJ_zps947adeda.jpg

2013_0407AK_zps4b63ff77.jpg


Lemon #3
2013_0407AL_zps58be0f9d.jpg

2013_0407AM_zpsc1212c99.jpg


Lemon #4
2013_0407AN_zps9b7e53db.jpg

2013_0407AO_zpse9b09d87.jpg


And a final group shot.
2013_0407AP_zps1dce321a.jpg

I'm not expecting a big yield, LA and this pheno of the Widow are really low yielders, let's see how the Critical Mass will do.
 
I'm keeping them at around 20cm, closest could be at about 10. I never had any problems with the panels being too close
 
maybe when you set the panels lower than 15 cm at the start of the vegetation it delays the height. is this correct?:?:
 
Nah, I haven't noticed anything like that during my grow and the tests I've seen. Some strains react a bit odd to the panels being too close, that's why it's recommended as a general specification to keep the panels at about 20 cm. It's up to the plant really and how it will react to specific conditions. As with ferts that not all strains require the same feeding, something similar applies to lighting conditions.
 
i see..maybe it's my idea..bongsmilie
Well I wouldn't say so, as I said we shouldn't consider all cannabis plants as the same, they do vary significantly and in your case what you say may pretty well apply.

That's the biggest problem we're all facing I guess. Due to prohibition all tests have to be clandestine and small scale.
 
Sub'd. Looking good man....I'm planning on going led myself and you look like you know what ur doin. Check back later man.
 
Budding continues. They seem to be doing OK with the new ferts, the lemons are much more into the new feeding

Group shot


Lemon 1




Lemon 2




Critical Mass




White Widow




Lemon 3




Lemon 4


 
Hey, man. Was just wondering...do you think I could get away with using 1 150w agromax panel in a small tent with 1 plant?
 
Back
Top