New grow dressor thing

Finally got all the parts in and now i can build my new grow dressor thing (forgot the name of it)


Took out all the shelf levels


then i added back pull out draws but took the bottom of the top one and then mounted the bottom to the dressor thing so it is permently there and going to be using the top draw to put net across it to lst and scog also add mylar to it , i know not perfectly straight

Now i cut 6inch holes with a hole saw on either side for my cool tube

now i attach my 6inch incline duct fan to my cooltube and tehn to 6 inch extender


there are reflectors on the top of this cool tube and that is where i stopped for today tomorrow i am going to be adding 140 mm fat at the top nd then one at he bottom to cycle the air threw the cabinate/dresser thing lol. So i have the cool tube with inline fan so almost no heat from that i can hold the tube with my hand forever and my hand is just warm. Now with the 2 140 mm fans to vent the cabinate itself this should be perfect. I am going to be growing one plant at a time in a 4 gallon bubble machine i made

Sweet! I'm subd

Forgot to att i m using only 250 watt hd/hps dual ballest but for one plant this should be more than plenty i think? or should i get a 400 watt ballest and lights. I got this ballest and lights for $100. Love craigslist. Now just waiting for my seeds to come in. then grow will be on its way. ia m going to also be using sensi grow ab and sensit bloom ab. then i use aquashield, silca blast, zho and then for blowering i use gravity

Dont know about the light. I would assume it is perfect for 1 plant. 400 might get too.hot. What are the dimensions. Btw I.have.no idea. Just my opinion lol

H 41" (35" cooltube) X W 31" X 14" using 250watt hps/mh for one plant (using fem seeds). IS 250 good enough for this grow I am gong to be adding and finishing the mylar tomorrow and putting the 2x140mm intake and exhaust is that enough for the cabinate since i am using a cool tube

I used a 400 watt for 16 plants. 1 1/2 footers and it was plenty. I'm excited to see.this. Nice job also with the reflectivity you put up

Thank you i am going to finish it up tomorrow and get all the sides i made maylar bottom above my dwc so u only see the net pot i will post more pics tomorrow with it all complete i cant wait for my seeds though, be abother 2-3 days and i have everything all ready and waiting.

Cool. Can't wait to see. What strain do you plan on growing?

These are the seeds that i purchased
1x Big Buddha - Blue Cheese - Feminized
1x Green House - Super Lemon Haze - Feminized
1x Green House - Bubba Kush - Feminized
1x Green House - AMS - Feminized

Came with 2 free seeds as well. going to either use one of them depending on what they are or AMS

Nice. I looked at your other thread. How did it finish up and what was your set up? Looked like some beauties too.

4x 4ft T5's and they got destroyed D:
Was finally able to start a new grow. Hope'n I get a good a turn out as my first one, if not better.

Damn sorry to hear that. This one will be better!

well i did some more work finally. I ripped the old backboard off and got a new one and screwed them in and used nail gun to make sure it is place and sturdy. I added mylar to that and this time alot more neatly and i added my 2X120mm fans and test ran my whole system for about 3 hrs and highest temp i got was and that was 3 inch from the cool tube so i am happy. Now i just need my seeds from ISC Facitly in NEW YORK ( been there now for 8 days)
View attachment 2098720View attachment 2098730View attachment 2098731View attachment 2098732View attachment 2098721View attachment 2098724View attachment 2098727View attachment 2098728

Nice! Looks great man. About time I see you post something lol. Check little ones out? Did some pics today