New cabinet im working on

Redlig

Well-Known Member
Just curious what you guys thought about the new cabinet I'm working. It's still a work in progress but getting there. Still need doors the middle wall put up andall my ventilation stuff. It is 30in deep 5 ft 5in tall and 80in wide. Sits on top of a cabinet that holds the supplies
 

Attachments

Redlig

Well-Known Member
Well I ran out of rivets so I had to order more. The next step is getting the middle wall put up and start working on doors. Once that's done I'll focus on light sealing both sections. I'll caulk the inside and on the outside I'm also putting corner trim so it should be pretty well sealed up....I have a few ideas for the doors but none I have settled on yet
 

Redlig

Well-Known Member
Ideally I want to try and find a used in closed bullitin board, knock the back of it out and bam doors(I would spray paint or tint the glass to light proof it.) My cabinet is 6 ft 8 in wide so I'd end up with a few inches on either side. Something like this
 

Attachments

Redlig

Well-Known Member
I'm starting to re think my layout. Right now I have 2 marshydro tsw2000 and 2 cheaper blurple led lights. I originally wanted to do one mars in the smaller flower area and to fill the larger veg area one mars and the 2 blurple lights. Now I'm thinking what if I just make the smaller are the veg area with the 2 blurple and move the 2 mars lights into the big area for a larger veg area. I haven't decided yet...what would you guys do? One downside is I'll really have to keep small mothers but on the upside if I flower in the big area I could do one half scrog and the other half more sog. Just gives me more to play around with
 

Redlig

Well-Known Member
Ugh I'm racking my brain on this door....I'm considering just putting some velcro up and doing a roll up door like another member did. Another option is just bolt up plywood and cut some doors in that
 
Top