Need Help add on LED for DIY Quantum board

[ledsopa]

Hey,

i would like create a DIY quantum Board with
Samsung F-Series Gen3 strips (112cm) 3000K

my small room is 22inch x 44,49inch and 56,29inch high

i would like use 12 strips.
also I would like add to this configuration additional LED for better control growth and flowering like blue-led (for a squatted plant because im interested in sativa hybrid plants) , Red LED maybe 660nm in flowering time and FarRed LED for sunset simulation to can maybe use shorter daylight hours.

My understanding for each LED is not professional i need help for configure this system.

can anyone help me to configure this system?

my next question is ... if is possible to configure the 12 strips in 2 parallel sections with one
dimmable MeanWell power suppllies or is better to use 2 for better control the color-LED's?

kind regards
sopa

 

[Rider509]

Run four 44" (1120mm) F Gen3 double row strips in parallel on a HLG-480H-48A driver and a separate driver for the red leds. Perfect for a 2'x4' space.

Why do you want to run 12 shorter strips? It makes for a lot more wiring.

 

[ledsopa]

@Rider509 i mean not the short strips , i mean the 1120mm strips
i get any information if i use 12 1120mm strips then i have more
evenly lights.
And between this strips (i know is very smale space then maybe only 20-25mm) i would like add some special color LED's

Double Row LED's from samsung F-Series Gen3 i never found?
have you any link for me?

Edit: i found double row strips LT-FB24B already...
i think first on the LT-FB22B (thex have same lm/w like LT-FB24B
the reason for the consideration is, I can distribute the LT-FB22B evenly

on the drawing you see my thinking with combination LT-FB22B, Far-Red, Red 660nm, and blue
but im not a specialist in LED and need help to configure this system

edit2: the wireing isn't a problem for me... i understand double rows much more easy to install but some hours more work is ok