BrandonT
Well-Known Member
six plants (white widow, super lemon haze, lowryder white russian, Sharksbreath, Barneys Farm LSD, and Lowryder/ ak47)
One 600W Metal Halide
One 600W High Pressure Sodium
A flow and drain system
15 Gallons Reverse Osmosis water Per Resevoir Fill, Running Into six large rockwool cubes (each seperate top feed)
A 240 CFM Panasonic Whisperline Fan Hooked Up With A computer cord
A Completely Mylar Covered Grow Room With 2mm Mylar Roll
A Micro Airstone for the resevoir with a large air pump from a 50 gallon fishtank
A Room Fan for Strong Stem Growth and Air Circulation
A Digital Ph Tester
A Digital PPM tester
Grotek Ph Up
Grotek Ph Down
Final Flush flushing solution for breaking down mineral buildup
Two High power Timers
For The Nutrients: DynaGrow Products (dynagro grow, bloom, protekt, magpro and also GH product: Floralicious)
First Week Of Veg
2.5 Grow
1.0 Protekt
(mls per gallon)
Bloom transition:
grow 3
bloom 5
protekt 5
Magpro 1.5
Floralicious Plus 1
Bloom:
grow 1.5
bloom 8
protekt 5
Magpro 1.5
Floralicious Plus 1
Ripen:
grow 0
bloom 10
protekt 5
Magpro 1
Floralicious Plus 1
Now For The Process
fill my resevoir with nutrients and water, 15 gallons Reverse Osmosis
Test the Ph and PPM making sure they are on target (first week veg 100-200 ppm), and the ph to 5.8
Set Up My Flood and Drain System (align 2 rockwool blocks beside eachother three blocks long) with the pump top feeding each cube with its own hoze for 15 minutes twice daily, at this time they will be smaller blocks untill they are a decent size and i will fit them into larger ones, the water will then drain back into the other resevoir.
Mount my Metal Halide Light Fixture, and lower to roughly five inches from plants (depending on the temperature i will test this first but my 240 cfm fan should keep this fairly cool)
Turn The Lights And Complete System On, setting the Timer for the lights at 18/6 and tthe timer for the feed system to 15 minutes twice daily (Right when the lights turn on, and roughly two hours before they go off)
Have This Repeated Daily Untill two weeks when i will change the Res and nutrients, which will now be more nutes because of plant size, set ppm and PH, and go again for the next two weeks
When they start drinking more and more ill start chaging the res more often, after fourth week ill change every week and a half, plus continue to change my nutes to the squedual
After the fourth week i will change to my 600 watt High Pressure Sodium
Forgot to mention i will top off any lost water to a line i will have marked for the 15 gallon line, and test the Ph/PPM of the water to keep it on target This Will Be Done DAILY
Im Going To Be doing the topping method for four colas and also Low Stress Training for a more Bushy Plant (bend the plant over and pin it to the rockwool cube with a hanger or something of the sort,(NOT A LEAD OR IRON HANGER, plastic) this will make it bush out alot more instead of get so tall)
Especially going to be topping the SuperLemon Haze as it gets tall!
keep my lights as close to the plants as possible without a high temperature(hopefully keep it around 80, with 60% humidity untill budd stage, Then ill get it to around 40% for budding)
hang out in my room whenever i can for co2, also am making a five gallon yeast and sugar/water co2 producer
I will tweek nutrients if even one plant is suffering, i want all the plants to succeed and because some are more sensitive, the others will have to pay with a little less nutrients, which i dont mind doing i will still have great results
for the last four days i will run only water and flush the plant with final flush mixed with sugar to get a nice flavored plant with tighter resulting buds
i continue to raise the PPM and nute amounts according to chart untill 2/3 of the hairs are orange, then i will harvest (different plants will harvest at different times, 1-2 week difference but im not worried about it)
One Day before harvest i will set it to 24 hours lights off to make the plant have massive streess and push all its remaining nutrients into its res production as it tries to protect itself
i will then harvest, make hash with trimmings/lower buds using a bubble bag, throw out the rest of the trim. , i will dry the buds on a line in a room with a dehumidifier and a fan on the buds, then put them in a cardboard box for a few days, then put them in jars to complete drying for a few weeks, opening the jars once a day to let in fresh air
That is my complete guide, let me know of anything else i might have missed, or any opinions you might have that might help me out to make this an even better op
Also any questions about anything i will be happy to help anybody out
One 600W Metal Halide
One 600W High Pressure Sodium
A flow and drain system
15 Gallons Reverse Osmosis water Per Resevoir Fill, Running Into six large rockwool cubes (each seperate top feed)
A 240 CFM Panasonic Whisperline Fan Hooked Up With A computer cord
A Completely Mylar Covered Grow Room With 2mm Mylar Roll
A Micro Airstone for the resevoir with a large air pump from a 50 gallon fishtank
A Room Fan for Strong Stem Growth and Air Circulation
A Digital Ph Tester
A Digital PPM tester
Grotek Ph Up
Grotek Ph Down
Final Flush flushing solution for breaking down mineral buildup
Two High power Timers
For The Nutrients: DynaGrow Products (dynagro grow, bloom, protekt, magpro and also GH product: Floralicious)
First Week Of Veg
2.5 Grow
1.0 Protekt
(mls per gallon)
Bloom transition:
grow 3
bloom 5
protekt 5
Magpro 1.5
Floralicious Plus 1
Bloom:
grow 1.5
bloom 8
protekt 5
Magpro 1.5
Floralicious Plus 1
Ripen:
grow 0
bloom 10
protekt 5
Magpro 1
Floralicious Plus 1
Now For The Process
fill my resevoir with nutrients and water, 15 gallons Reverse Osmosis
Test the Ph and PPM making sure they are on target (first week veg 100-200 ppm), and the ph to 5.8
Set Up My Flood and Drain System (align 2 rockwool blocks beside eachother three blocks long) with the pump top feeding each cube with its own hoze for 15 minutes twice daily, at this time they will be smaller blocks untill they are a decent size and i will fit them into larger ones, the water will then drain back into the other resevoir.
Mount my Metal Halide Light Fixture, and lower to roughly five inches from plants (depending on the temperature i will test this first but my 240 cfm fan should keep this fairly cool)
Turn The Lights And Complete System On, setting the Timer for the lights at 18/6 and tthe timer for the feed system to 15 minutes twice daily (Right when the lights turn on, and roughly two hours before they go off)
Have This Repeated Daily Untill two weeks when i will change the Res and nutrients, which will now be more nutes because of plant size, set ppm and PH, and go again for the next two weeks
When they start drinking more and more ill start chaging the res more often, after fourth week ill change every week and a half, plus continue to change my nutes to the squedual
After the fourth week i will change to my 600 watt High Pressure Sodium
Forgot to mention i will top off any lost water to a line i will have marked for the 15 gallon line, and test the Ph/PPM of the water to keep it on target This Will Be Done DAILY
Im Going To Be doing the topping method for four colas and also Low Stress Training for a more Bushy Plant (bend the plant over and pin it to the rockwool cube with a hanger or something of the sort,(NOT A LEAD OR IRON HANGER, plastic) this will make it bush out alot more instead of get so tall)
Especially going to be topping the SuperLemon Haze as it gets tall!
keep my lights as close to the plants as possible without a high temperature(hopefully keep it around 80, with 60% humidity untill budd stage, Then ill get it to around 40% for budding)
hang out in my room whenever i can for co2, also am making a five gallon yeast and sugar/water co2 producer
I will tweek nutrients if even one plant is suffering, i want all the plants to succeed and because some are more sensitive, the others will have to pay with a little less nutrients, which i dont mind doing i will still have great results
for the last four days i will run only water and flush the plant with final flush mixed with sugar to get a nice flavored plant with tighter resulting buds
i continue to raise the PPM and nute amounts according to chart untill 2/3 of the hairs are orange, then i will harvest (different plants will harvest at different times, 1-2 week difference but im not worried about it)
One Day before harvest i will set it to 24 hours lights off to make the plant have massive streess and push all its remaining nutrients into its res production as it tries to protect itself
i will then harvest, make hash with trimmings/lower buds using a bubble bag, throw out the rest of the trim. , i will dry the buds on a line in a room with a dehumidifier and a fan on the buds, then put them in a cardboard box for a few days, then put them in jars to complete drying for a few weeks, opening the jars once a day to let in fresh air
That is my complete guide, let me know of anything else i might have missed, or any opinions you might have that might help me out to make this an even better op
Also any questions about anything i will be happy to help anybody out
