my first aeroponic design
- Thread starter mrbuzzsaw
- Start date
tusseltussel
Well-Known Member
lookin good, should grow em faster than a green snake up a sugar cane
northerntights
Well-Known Member
damn thats sexy! How did you affix the sprayer to the pipe?
HATCH
Well-Known Member
i hope this works out
Say Bro, I Have Seen Other People Make Two Different Sieze Of Saw Horses To Get The Tray To Drain Back To The Res., It Work Pretty Good, & It's Up To You What Your Starting Hieght's Are!!!!
mrbuzzsaw
Well-Known Member
ok the sprayers are the standard red winged type they screw into the caps so i can reach in and pull them out any time i need to i can also close any one off by simply removing the cap and capping it off if i am not growing in that pot.
each 3 inch pot gets 2 sprayers sprayers are 360 degree type.
i am building a new unit tonite with internal piping ill use a single pipe internal with 7 sprayers.
this is a 4 foot 6 pot system
i am likely gonna train plants in alternating directions so they all get light We will see.
how many gallons of water should i use?
each 3 inch pot gets 2 sprayers sprayers are 360 degree type.
i am building a new unit tonite with internal piping ill use a single pipe internal with 7 sprayers.
this is a 4 foot 6 pot system
i am likely gonna train plants in alternating directions so they all get light We will see.
how many gallons of water should i use?
northerntights
Well-Known Member
are the caps that hold the sprayers threaded? Did you just tap them yourself? I really want to make a system like this myself... and man yours looks professional.
mrbuzzsaw
Well-Known Member
i used caps that screw into the pvc they are domed and the sprayers screw into the caps do you want to see them as well?
i have to warn you tho the glue dries almost instantly so if you misalign your fucked
other then that i did this in 2 hours start to finnish
i am doing the second one with a much simpler design so i can see if it makes a difference in the grow if not ill be making it totally internal with a single pipe and cap i can build that in like 30 min from start to finnish
mrbuzzsaw
Well-Known Member
ok you asked about the sprayers so i took a picture of how i did it i wanted to be able to remove at will and replace as well so here is what i did
mrbuzzsaw
Well-Known Member
genius. 6 plants, I would use 18-20 gallon res. what size a pump ya got? someone asked is that 6" pvc decking pipe? gotta know exactly!
lagest post i have ever found is this one at 4 /34 i think
it comes 8 foot 2 inches long so i cut mine at 4 foot 1 inch each
SaddamHussain
Active Member
awesome mate, professional looking setup. I gotta give this a go, soil is dirty crap!
