Mounting Lights and Heat issues- please advise :)
- Thread starter HerbieSmith
- Start date
9inch bigbud
Well-Known Member
how much watts are you using? you could swap the CFLs for a single HPS in a cool tube you would get more yeild for less watts used the plants could grow up and touch the cool tube without burning them if you use a 250w lamp.
if you stick with the CFLs then you will need more air extraction to get the hot air out.
HerbieSmith
Well-Known Member
... those'r some funny lokkin GROW lights 
9inch bigbud
Well-Known Member
here is what you can do with 1200w and cool tubes
the room is 4 feet high x 6 feet long x 3 feet wide 2 x 600w hps with in 9" of the tops the temps never got over 85f even in summer time. in the winter its was around 70f. ditch the CFL's
the room is 4 feet high x 6 feet long x 3 feet wide 2 x 600w hps with in 9" of the tops the temps never got over 85f even in summer time. in the winter its was around 70f. ditch the CFL's
darkdestruction420
Well-Known Member
need a vent on top of cabinet or if u already got one make the fan blow air out of it
HerbieSmith
Well-Known Member
yep i have a fan in the upper left corner now- 65cfm and a passive intake in the bottom right.
newconceptz
Active Member
look at my grow u might be able to add lights the was i did. air circulation will be better and the bulbs my cool better
everyday.smoker
Active Member
I recommend to wire ballast separate from tubes and take them out of cabinet.
Similar threads
