Making vaping oils

Making vamping oil


Freeze everything you will be working with, Everclear grain alcohol, strainers, bowls, spoons, product, filters, freezer containers for oil. I use a (body cooler I call it) large cooler to work in I got at Sam’s. Dry ice.

Everything needs to be frozen to -47 degrees 48 hours. It’s easy with Dry Ice. Everything needs to be done in the cooler. Strain product no more than 10 minutes with Everclear, the point is not to pull chlorophyll out of the product and to strain at least twice. I use a Megahome distiller for essential oils. This will take a while. Use a magnetic stirrer to reduce the oil. The next step is vacuum purge. Fractional distillation is what I’m working on now.

When you say vape, do you intend on filling cartridges or just dabbing the loose concentrates?

Wish I had a magnetic distiller
I like 2 diff kinds of oil Black and Gold. If u have int this is what I do:

1) Blk Oil: 1 oz herb to 20 oz everclear rm temp let it mix ~20 min, drain& strain into lg Pyrex, let it sit in sun (cover with cheese cloth)
for 20 min & alchemy occurs “green is gone”, makes 5.6 Gr Black oil, no I don’t Dewinterize...but u can if u want.
(NO HEAT used until down to 2 oz liquid in small 2x2 empty Pinzey spice jar
place on coffee warmer until All micro bubbles gone, stir with toothpic!) This oil works just fine mixed 5:2.5 ratio In C Cell cartimizer 2mm oil feed holes for vaping).

2) Gold Oil: Same as above, but use 5 lb of Dry Ice in a med size cooler
Prepare herb in glass jar & 20 oz Everclear in separate jar, when temp = minus -45f immediately mix the 2 &
shut cooler up...lightly shake cooler every 4 min., after 20 min done, drain & strain sitting in closed cooler.
Now just evaporate using fan blowing over cheese cloth cover Pyrex dish, finish off like above on coffee warmer. Yummy
I’ve tried a number of different solvents & emulsifiers(Puff Magic is my favorite did not like MCT oil & this is the way for me).
C Cell with 4-2 mm oil feed holes the way to go for vaping Amazon 2.50–3.5 ea 5 pacs usually.
Also 4 volt vape Pin 3 for $18 no ship fee Amazon... just takes some searching DH Gate for bulk buys.
( usually the 4 volt pins have 3 variable voltages & pre-heat, I don’t use preheat I think the 4 volt setting
just fine). I also use Puff Magic as a oil emulsifier, did not like MCT oil & terps r expensive.
I like 5:2.5 ratio
(Oil to Emulsifier)
I could go on & on, this is all new to me as well past year, just got tired of smoke in my lungs.

Teflon spatulas make best stir sticks & toothpic for stirring oil in Penzey Spice Jar (I save the jars when the wife is done using the spice). Absolute perfect size & thickness.

Put some oil on end of a safety pin & light iT as final check that all alcohol is evaporated u should not see any sizzle just melt...!
vapes well for me- about 45-55 hits per .5 mm cart. fill (1 oz herb will make enough oil for about 14 fills Blk oil, & 10 with gold oil or more if u want to lower the potency.)
As mentioned I use the 4 volt vape pin setting. Occasionally clean the draw tube with a pipe cleaner cut to 1 inch, appears these ceramic oil absorption takes in more than can handle-probably why I don’t use preheat function & draw soft !

Isn’t life grand, hope i didn’t bore u contact me any time. Post on your success with fractional distillation, like to know...thnx