yo dude, you got the newer version of the Apollo aswell, the old module had 15 leds per cluster (lense), this one has 12. They also put on redesigned optical lenses on it so no light leaks from the sides of the LED's under the faceplate, unlike the older version.
Plus if ya handy with a soldering iron, they are really easy to repair man if a LED does go pop, get a 5v DC Adapter, strip the wires, touch the + side of the LED with the + wire of the adapter and the same with the - ones, and bingo, the LED will light up, if its the blown one, then it wont. Pop out with Soldering iron and replace.
So you wont have to wait so long for replacements, as for the power drivers, I have owned my Apollo LED for over 3 years now, yeah ive popped a few LED's (my fault for Fooking about putting in higer voltage ones lol) but I have never popped a Driver., as for the Fire Hazard, Quite simply.....bollox.
They use MeanWell drivers & they are used everywhere across the world in all sorts of electronical applications,, anyway, even if one did overheat, it would just blow its internal fuse & the red light on the front will go out.
If its a LED problem, it should blink.
I can tell you the main reason that they do fail aswell, its the heatsink thermal paste they use, its ok bit not brilliant, change it all for Artic Silver and your laughing, in fact many re-suppliers of these light have already upgraded the thermal paste and tape as china cant. cos its too expensive for them ffs. lol.
Plus they sometimes don't clamp the LED board down hard enough, check all the screws on the LED cluster plates. (allen key ones aswell, nightmare)
They should not be loose nor overtightened. Its like clamping a head gasket down, you gotta make sure the LED Circuit board is tightened evenly onto the thermal bars.
Ive seen a few come from china with loose screws aswell. Plus people like putting IR in them, that pops them aswell, cant handle the heat generated
Oh I could go on and on about the design faults, pros and cons, etc.. but I wont, its a simple LED to do a simple job. Growing.
HGrow.............you should really do your research before trolling and scaring the shit out of people ffs. & don't come back with some pathetic TROLL reply, we are sick of it,
KeepItLegal.....Your LED is probably the best selling LED in the world.
yeah, so many people have copied it, but why? if it was so bad, why are theyre thousands & thousands out there? all growing good results with, Even Dutch Passion are selling a similar LED now & theyre getting no complaints.
Go to their website if you don't believe me, its a snazzy white with the DP logo on it.
You got a good setup there mate. Happy Growing to you.! your gonna be pleased.
Its a good start to growing with LEDs aswell, Plus if you need a strip down journal, I can provide one, ive had these units open a thousand trillions times, just love mixing spectrums and changing stuff. 3 of my custom ones are working right now, all doing really well.
so don't listen to the Gripe Hype, see for yourself inni
Peace Bro & Happy LED Growing All ! 
[/QUOTE
That's radicious . You seem very familiar with Cidly company . It seems that you make those Apollos . What you said are all bullshit 。 They use Meanwell LED drivers .They assemble the LED drivers themselves .Oh , MAN . Are you sure their LED drivers are Meanwell , when I post their LED driver and not Meanwell , then you will know that .
I will post more to show you their products are really "good "
