just made some dry seive hash...

chongsbuddy

New Member
so i had 5 bubble bags...had,i only have a 120 micron and a 70 micron bag left..
i have a great way to make dry seive hash that works very well,takes some time,but produces quality hash!

so what i do is put the 120 micron bag on the inside and keep the 70 micron bag on the outside,i do this because anything above 70 microns,the bag will hold the crystal,and what comes from the 70 micron bag is my personal high quality dry seive.

so i trim all my buds,i always leave the little popcorn and save the trim from both my indoor and outdoor,i strip all the stalks of bud,and remove all leaves before the green matter dries.
i then put all my little popcorn buds and trimmings in a 8' x 8' vapour barrier plastic and tie it up,so nothing can get in or out of the bag.
now for 2 weeks i will keep this bag in my room and gently shake it during commercials,free time...whenever!
when the 3 weeks of gentle shaking are done i get a 3' x 3' piece of vapour barrier and put it in my tub,all corners raised up.
i fill my bags with matter and shake,ill do this off and on for a whole day.collecting the crystals and putting them in a glass contaner with a lid as i go

now i have a litle wooden box about 3" x 8",and i line it with good saran wrap and fill the box with my crystal,i have a little 3" x 3" press that i use to press the powder down to form a loose block,i then fold the saran over and tape the seem,keeping the shape as best as possible,i get a big piece of newspaper and soak it,and i mean soak it...i put the crystals in the block of saran and put in the newspaper,tightly folding the newpaper around and releasing any excess water and/or air.now i put it in the oven 4 times,10 minutes a time at 225F,each time i take out the package i put it on the counter and press it down as hard as i can.rewetting the newpaper every time you go back in the oven

after this process is over i get my clothes iron and put it on medium with a steam setting and i put the block of semi made hash on a board put the iron on top and put my ballast on that for pressure,i do this for 5 minutes about 3-5 times,2-3 on each side...DO NOT LET DRY OUT AND DO NOT FORGET!

after this process is over i put between 2 bricks overnight and i have some nice hash the next morning!!!

here are some pics of my latest hash finished today!


next time i make it i will include a tutorial with pics as i go...
 

Attachments

Top