Homemade oil for my vape pen

Mikenike

Well-Known Member
I just want to use a rosin press. What are some trusted terpene companies?
I’ve tried servm with my rosin and it didn’t work well. Did a little over .1ml for 1g of rosin. It worked great when I did it with winterized rosin tho. Great with qwet too which is now my go to method. I like really flavorful fruity/sweet carts so I got some of their distillate flavoring coming. Gonna try servm and some flavor, they claim it should be like dispensary stuff

Edit: sorry replied to the wrong post
 

Mikenike

Well-Known Member
Don’t need a “ liquified “ like that. Much cheaper and better solutions
Their “liquified” thinner works pretty well too. .2ml per gram,m. The benefit of “servm” is potency. I haven’t come across another terp or thinner with that low of a ratio .1ml/gram
 

yummy fur

Well-Known Member
I don't have a rosin press but have thought about getting one. What do you have for a press and how much did you pay? You pretty happy with it?
I recently obtained a Slug33 Fat Mac which takes 3.6g and I'm getting .6 of top shelf fragrant rosin from my good quality larf. Once you get the hang of it it's quite a lot of fun and very satisfying. You'll notice that the you tube videos have a fair few trolls drawing attention to the high heat, but in fact it is not what it seems, it produces the most fragrant oil I've ever had, much better than the best alcohol and activated charcoal extracted honey oil. Basically the same but with more terpenes. So with its nice consistency and high terpene content it would be ideal to dilute down for a vape pen. Oh, yeah no bags needed, just stuff the herb straight into the forge, this in itself is nice to do, it's all very hands on and has an artisanal feel to it. Would suit an Amish dope fiend.
 

shera99

New Member
Hi. I’ve read quite a bit of this thread and I've tried to put the pieces together, can someone tell me if i have this right?
back story, i'm just about to harvest my first plant (yay!) if she ever is ready, and want to make a cart for someone. I know I have economies of scale working against me but i'm hoping it can still be done without going through *too* many hoops to do it.

I'm open to buying syringes, filters, beakers and even a coffee warmer but probably not much more.

I'll have kief and flower.

From what i've read this it generally goes, (and i get the feeling i'm missing a step too)...

1. Decarb the kief then stick it in the freezer.
2. Cover with frozen-for-24 hours 191 proof alcohol.
3. 3 minute qwet extraction, strain through teabag (should i use something else for this? a 100 micron strainer or something?
4. Evaporate on coffee warmer (until when?)

(Question here, what is left at this stage? Is it a oily substance? Something else?)

5. While warm put through a PSE .22mu syringe filter? (What mm of membrane? I see 33, 25 and 13mm)
6. Add terpenes? (i know very little about this, but what about this $10 for 2 samples, It's this one: https://denverterpenes.mystagingwebsite.com/product-category/100-free-samples/
7. Use syringe to load the cartridge?

am i missing an ingredient? Don't i mix it with a more substantial amount of whatever is usually in those cartridges?

Warmer $7
Beakers $4
Cart $8 (ugh)
Syringe filters $9
Sryringes $7
Terpenes $10

Well, i guess i'll try to make a few, ha. Cuz obviously it's not worth it for 1.
 
Last edited:

Go go n chill

Well-Known Member
Hi. I’ve read quite a bit of this thread and I've tried to put the pieces together, can someone tell me if i have this right?
back story, i'm just about to harvest my first plant (yay!) if she ever is ready, and want to make a cart for someone. I know I have economies of scale working against me but i'm hoping it can still be done without going through *too* many hoops to do it.

I'm open to buying syringes, filters, beakers and even a coffee warmer but probably not much more.

I'll have kief and flower.

From what i've read this it generally goes, (and i get the feeling i'm missing a step too)...

1. Decarb the kief then stick it in the freezer.
2. Cover with frozen-for-24 hours 191 proof alcohol.
3. 3 minute qwet extraction, strain through teabag (should i use something else for this? a 100 micron strainer or something?
4. Evaporate on coffee warmer (until when?)

(Question here, what is left at this stage? Is it a oily substance? Something else?)

5. While warm put through a PSE .22mu syringe filter? (What mm of membrane? I see 33, 25 and 13mm)
6. Add terpenes? (i know very little about this, but what about this $10 for 2 samples, It's this one: https://denverterpenes.mystagingwebsite.com/product-category/100-free-samples/
7. Use syringe to load the cartridge?

am i missing an ingredient? Don't i mix it with a more substantial amount of whatever is usually in those cartridges?

Warmer $7
Beakers $4
Cart $8 (ugh)
Syringe filters $9
Sryringes $7
Terpenes $10

Well, i guess i'll try to make a few, ha. Cuz obviously it's not worth it for 1.
After the everclear bath you will evap with your coffee warmer OUTSIDE! You can blow your house up!!!! what is left will be sticky goodness. Weigh that and if it is say 5 grams then add 5 mi of your cutting agent “mct oil” and filter through the ..22 micron filter
 

Airwalker16

Well-Known Member
Made this with dry sift. Paint roller tek. Mixed with Mass Terpenes liquidizer, about .3ml per gram. Then passed through a .45 micron syringe filter before transferring into the cartridge. Nice clean taste (I went with unflavored on this one).

Do you have good success with paint roller tek? Works okay for me but still pick up quite a bit of contaminate too... Any tips?
 

Go go n chill

Well-Known Member
Bro we ain't even talking about the same thing. I'm talking about using screens for dry sift
No BRO we are talking about the same thing..... your .45 micron cartridge filter...... they are made with different materials..... it helps to pick the one that doesn’t react negatively with what your filtering.... PES filter cartridges filter the best and fastest...... bro
 

Go go n chill

Well-Known Member
No BRO we are talking about the same thing..... your .45 micron cartridge filter...... they are made with different materials..... it helps to pick the one that doesn’t react negatively with what your filtering.... PES filter cartridges filter the best and fastest...... bro
Probably 50 fucking pages back I posted the material chart and what they work best with.
 

Airwalker16

Well-Known Member
No BRO we are talking about the same thing..... your .45 micron cartridge filter...... they are made with different materials..... it helps to pick the one that doesn’t react negatively with what your filtering.... PES filter cartridges filter the best and fastest...... bro
You're saying screens, stretched out over a metal frame, 2" thick, that creates a 24"X20" - 42"X36" rectangle, that you manipulate work through to sift resin heads from, made of PES or whatever? Cause I'm talking about SILK screens. Big ass ones
 

Go go n chill

Well-Known Member
You're saying screens, stretched out over a metal frame, 2" thick, that creates a 24"X20" - 42"X36" rectangle, that you manipulate work through to sift resin heads from, made of PES or whatever? Cause I'm talking about SILK screens. Big ass ones
I was trying to quote Morvis, which is in the same conversation, him talking about his vape cart
 
Top