Help !!!

Hello, i have a 4x3 area and i want to know how many watts with and led light the light will be a diy and there will be 6-8 plants on this area.... Thanks !!
 

puffenuff

Well-Known Member
Shoot for at least 400w, although I would personally prefer 600w or more. But 400w should give you a good starting point then you can gauge more accurately if more power is needed.
 

bostoner

Active Member
The rule of thumb is at least 50 watts per foot with hids. Leds are more efficient but dont have good par reach so basically the leds above are the ones that will powering whatever's below them but wont have much benefit to the plants on the other side of the area. So I'd think the rule would be about the same. 50 watts per foot on your panel totaling in about 600 watts of led.
 

puffenuff

Well-Known Member
No problem, for reference, I've been running 200-250w in a 2x3 with satisfactory results but still think I can do better.
 

jubiare

Active Member
what array are you going to have? what kind of emitters, brand, 1/3/5/10 or more watts emitters:o
 

bostoner

Active Member
Well Par absorption of chlorophyll a and b both peak at about 440nm blue and 670nm red, give and take 10nm. Which isn't the only thing to consider but is important. I've read studies where they say using a bit of mid white(green) was crucial in healthy plants . If I was making one I think I would go about 60-70%red 10%white and 20-30%blue, just use it for flowering and veg with t5s or cfls or something. or make a slightly smaller one for veg.
 
Top