Help with ventilation please!!!!!!!

jojo091705

Member
This is my first grow I have a total of 22 plants right now 9 KAT clones, 4 White Rhino clones, 4 BCN Diesel clones, 4 bubblicious clones and 1 Space Cadet clone. I am currently using 3 gallon pots with ocean forest dirt and 2 T5HO 8 bulb lights and only a box fan for ventilation. I have a 4x8x6.5 ft grow tent and a 1000w ballast, Hood and Hortilux bulb on the way. The space I am vegging in currently is 4.5x8 lined with black and white poly and I plan to make this my Bloom room with the 1000w ... Both the tent and the Bloom space is in the same room I am hoping to get some help with designing a intake and exit ventilation system. Please comment if you have experience with these strains and know some tricks or just how good they are also...All but the KAT was just received yesterday and are kind of sickly looking I am in hopes to nurse them back to health.
 

Attachments

  • veg3.jpg
    veg3.jpg
    60.8 KB · Views: 32
  • veglights.jpg
    veglights.jpg
    33.8 KB · Views: 20
  • veg.jpg
    veg.jpg
    65.9 KB · Views: 22
  • veg2.jpg
    veg2.jpg
    48.4 KB · Views: 17
Hi, It usually takes a couple days to get them to perk up. In my neck of the woods its winter, maybe want to keep them warm till they settle in. You gonna flower all of them in a 4x8 area you dont wanna veg long. I would be lookin at a scrog type grow if I was you.
 
Sorry, I didn't comment on ventilation, My favorite way is to make a window box.
Here, I cut this out of one of my journals:

First I built the window box for the exhaust and got a better idea how I am going to run it.​

You see, this flower cabinet is about 4 inches taller then the window opening. I extended the box frame to
accommodate it. That old piece of plywood you see through the window was my old idea of stealth. lol​

Heres some pics.​

IMG_2875.JPG

I found a sheet of plywood and cut the sides, Notched them at the top​

IMG_2877.JPG

I have a second cabinet to vent so I cut a notch for one of those space saving dryer vent ducts.​

IMG_2878.JPG

Then the back was two piece, I need to align the cabinet and drill the four inch holes so I figure
to get them straight I will try and drill it at the same time then move the cabinet to mount the flanges.​

IMG_2879.JPG

Then to make it stealth from the outside view I put the blinds back up and angled them down.​

IMG_2882.JPG

Then used duct tape and weather stripping to seal it up.​

IMG_2880.JPG


IMG_2884.JPG


OK, got the box done, Now from outside it is stealth, just need to cut the holes.
 
No problem man, You know, you can use this for both intake and exhaust. Just mount the intake at the bottom and exhaust at the top.
 
Back
Top