help with diy 730 nm far red

This is for a 4x4 room and using 730 nm far red for supplement lighting only to go along 4 or 5 a51 xgs 190.
I found this heat sink http://www.amazon.com/dp/B001A5V1K2/ref=cm_sw_su_dp I guess I can glue leds to flat part on bottom.
What else do I need How many leds? What kinda of driver? Is there a special glue. What gauge wire? I would like to buy everything from same place if possible. I know this is a lot questions, but I've been reading on leds for 2 weeks and there is not a whole lot of data from what I see. Links would be great so I buy exactly what's needed. Thanks

Have you thought about the 730 leds you are going to use? stars? multichip? anything in mind?

Chronikool said:

Have you thought about the 730 leds you are going to use? stars? multichip? anything in mind?

Click to expand...

No that's what I'm hoping some of you can tell me?

Ok....well i dont think that heatsink is very good as it will be in one area.....the way i would go is too 'mirror' the A-51's.

You want a heatsink that is long and skinny (40mm wide x 300 or 400mm long x 10-12 high) That way you can run them down the sides of the A-51's and get better coverage...with me...?

Ok...some links....now i dont think you will be able to get everything in the one place....

Heatsinks and thermal paste/glue and or thermal pads >>>>>>>>>>>>>>>>> http://www.aliexpress.com/store/126942

Dylan is awesome...he will get you any heatsink you want....good prices too

stars/multichips are probably your best bet..... >>>>>>> http://www.aliexpress.com/item/Free...D-620nm-630nm-red-Power-Beads/1460252686.html

talk to these guys....they might do the 730nm.....or search/chat around....

18 gauge wire will be sweet....

depending on how many 730s you plan on putting in...dependz on the driver...