Full Spectrum Dry Sift

K

KasparGrower

Well-Known Member
Hi guys! I would like to know if someone has the knowledge or even better tried making full spectrum hash using dry sieving. I know Frenchy uses the 45-160 bags for achieving full spec water hash,I would like to know if with dry sieving someone can stick to this range or for screens the micron range may change. I know everyone is going for full melt with static tech,10min sift and so on,but I would like to have a complete product with as many terpenes as possible and with a wide range of cannabinoid,not a problem if it's not 100% full melt.
Let me know!
 
K

KasparGrower

Well-Known Member
So you place the green material on the 150 then you filter through 110 and 70 then what goes though 50 is waste?
Instead of static tech if I want to refilter the 110 and 70 would it be a good compromise between yield and quality?
 
reallybigjesusfreak

reallybigjesusfreak

Well-Known Member
Fadedawg said:
I use 150, 110, 70, and 50 micron for dry sieve. I then do an electrostatic clean to reduce the 110 and 70 to full melt.
Click to expand...
I have never heard of that, very interested. i will have to do some research on it after work today, would you mind providing a short synopsis of that? Thank you.
 
Fadedawg

Fadedawg

Well-Known Member
KasparGrower said:
So you place the green material on the 150 then you filter through 110 and 70 then what goes though 50 is waste?
Instead of static tech if I want to refilter the 110 and 70 would it be a good compromise between yield and quality?
Click to expand...
The 150 to 110 will catch the larger heads, and the 110 to 70 will catch the fine heads. The stuff that falls through the 50 usually goes into medibles.

I use a stainless screen for the 150 micron screening, and silk screen for the refining screens.

Here is a link on how to easily make your own sieving frame collection for refining dry sieve. https://web.archive.org/web/20150206155233/http://skunkpharmresearch.com:80/diy-sieving-frames/

I don't do large batches at a time, so electrostatically clean the refined heads using parchment paper and a cassette.
 
thumper60

thumper60

Well-Known Member
KasparGrower said:
Hi guys! I would like to know if someone has the knowledge or even better tried making full spectrum hash using dry sieving. I know Frenchy uses the 45-160 bags for achieving full spec water hash,I would like to know if with dry sieving someone can stick to this range or for screens the micron range may change. I know everyone is going for full melt with static tech,10min sift and so on,but I would like to have a complete product with as many terpenes as possible and with a wide range of cannabinoid,not a problem if it's not 100% full melt.
Let me know!
Click to expand...
I would say 110 silk screen is what ya looking for
 
thumper60

thumper60

Well-Known Member
i got these a few yrs back 30 bucks each,from www silkscreening supplies.com the 110 gives me melt I shake it thur the 60 first I don't use the 156photo[755].JPG
 
You must log in or register to reply here.
Top