I have a 8' wide x 8' tall x 20' long room that i am converting into a grow room.
I have the walls and floor covered in panda film and the ceiling in mylar 100% sealed. The lights will be connected to 220v, everything else (fans, ac, etc) will be 110v.
I will have temp control at all times (day temp diff from night temp)
I am starting out with 12 plants. Starting with teens of either white widow or skunk #1.
So starting with 12 plants, i will be starting at the end of my room and working my way to the other end.
I want to do the Scrog Technique. I was looking into the "DWC Basic Kit" with 4, 4 inch net pots from Stealhydroponics.com..
(http://www.stealthhydroponics.com/product.php?xProd=47)
I was going to purchase 3 these at first and add drip to each one..
(http://cgi.ebay.com/ADD-drip-your-D...274?pt=LH_DefaultDomain_0&hash=item415a8add32)
For Lighting,,, I am going to have two yeildmaster classic 6 inch hoods side by side, one holding a 1000w HPS and the other holding a 1000w MH for the whole spectrum. Eventually getting more lights with more plants. I want to have 2000w Total per each 4'x4' scrog area.
I will have seperate AC blowing from a different room connected to 6 inch ducting, going into one side of the first hood, coming out, going into one side of the second hood, then running outside (with a vortex fan in line). and i will have multiple fans between the glass (bottom of the hood) and the scrog screen. So cooling shouldnt be a problem.
I have a 450cfm carbon filter also connected right next to the hoods.
My question is, using these DWC kits.. Would there be to much clutter? and is this to much lighting? Heat shouldnt be a problem right? If these DWC kits are not gonna work.. i was gonna use a 3.5 gallon DWC bubble system with 6" net pots..
Hypothetically, if the DWC kit from stealthhydro wont work. How far apart should i space each plant with the 3.5 gal DWC? and how many could i fit under a 4'x4' scrog area with 2000w of HPS and MH?
Obviosly i want as much yield as possible!
Thanks!
EDIT: oh yea i forgot, i was also looking at the Oxyponics® 4 Planter System from Stealthhydro also..
http://www.stealthhydroponics.com/product.php?xProd=467&xSec=53
The reason im trying to get multiple plants in 1 container is because it will become monotonous changing the water out of each 3.5 gallon bucket every few weeks. and difficult once it hits the screen. The DWC Starter and the Oxyponics both have drainers.
I have the walls and floor covered in panda film and the ceiling in mylar 100% sealed. The lights will be connected to 220v, everything else (fans, ac, etc) will be 110v.
I will have temp control at all times (day temp diff from night temp)
I am starting out with 12 plants. Starting with teens of either white widow or skunk #1.
So starting with 12 plants, i will be starting at the end of my room and working my way to the other end.
I want to do the Scrog Technique. I was looking into the "DWC Basic Kit" with 4, 4 inch net pots from Stealhydroponics.com..
(http://www.stealthhydroponics.com/product.php?xProd=47)
I was going to purchase 3 these at first and add drip to each one..
(http://cgi.ebay.com/ADD-drip-your-D...274?pt=LH_DefaultDomain_0&hash=item415a8add32)
For Lighting,,, I am going to have two yeildmaster classic 6 inch hoods side by side, one holding a 1000w HPS and the other holding a 1000w MH for the whole spectrum. Eventually getting more lights with more plants. I want to have 2000w Total per each 4'x4' scrog area.
I will have seperate AC blowing from a different room connected to 6 inch ducting, going into one side of the first hood, coming out, going into one side of the second hood, then running outside (with a vortex fan in line). and i will have multiple fans between the glass (bottom of the hood) and the scrog screen. So cooling shouldnt be a problem.
I have a 450cfm carbon filter also connected right next to the hoods.
My question is, using these DWC kits.. Would there be to much clutter? and is this to much lighting? Heat shouldnt be a problem right? If these DWC kits are not gonna work.. i was gonna use a 3.5 gallon DWC bubble system with 6" net pots..
Hypothetically, if the DWC kit from stealthhydro wont work. How far apart should i space each plant with the 3.5 gal DWC? and how many could i fit under a 4'x4' scrog area with 2000w of HPS and MH?
Obviosly i want as much yield as possible!
Thanks!
EDIT: oh yea i forgot, i was also looking at the Oxyponics® 4 Planter System from Stealthhydro also..
http://www.stealthhydroponics.com/product.php?xProd=467&xSec=53
The reason im trying to get multiple plants in 1 container is because it will become monotonous changing the water out of each 3.5 gallon bucket every few weeks. and difficult once it hits the screen. The DWC Starter and the Oxyponics both have drainers.
