First rubbermaid grow box..got issues

you can drill 2 holes on the lid, and use zip ties to secure the power strip.

spray paint the inside for stealth, 4-5 coats of black than as many coats of white till you cant see the black, dont get the 99 cent a can paint it'll chip way to easily. Velcro the strip wherever

u can use zip ties i did and i used foil tape it works fine for reflecting light just throws it it random directions which is fine because...whole box is foil or plants...i painted mine black to help with the light prob...i worked but heats went up want some pics of inside and outside? made my own filter 2

Hilltop112 said:

spray paint the inside for stealth, 4-5 coats of black than as many coats of white till you cant see the black, dont get the 99 cent a can paint it'll chip way to easily. Velcro the strip wherever

Click to expand...

paint wouldnt stick to mine for shit you have to sand it first....totally not worth it in my opinion lol

the good premium paint stayed on mine just fine, cleaned it first let it dry and painted, granted i spent like 60 bucks on fucking paint it still worked perfect and was completely stealth

mylar, cheap and doesnt let any light through. velco is great but im starting to become a glue gun addict i glue gun everything in place! haha but yeah velco is better cus you can put stuff on and off

Hilltop112 said:

the good premium paint stayed on mine just fine, cleaned it first let it dry and painted, granted i spent like 60 bucks on fucking paint it still worked perfect and was completely stealth

Click to expand...

40$ more you coulda bought a tent what a waste of money on rubbermaids n paint

Not sure but I think temps mite be low..any ideas?...just put bag seeds in yesterday

What's low to you?

Not sure on exact temp but def aint 70...i have fan in bottom tote and plant in top until its taller not sure if I need fan or not...bulb dont give off much heat either

so far

is that foil in there still?

Yea...thats old pic...just learning to upload...new coming in minutes

just to let you know next time on a Rubbermaid, it would be more beneficial to find something for your pots that would take up more floor space and not height space, roots will grow no matter what, you can gain some more height doing that.

actual setup

Heigth shouldnt be an issue...plant will be harvested approx. 2 ft...they are sitting on milk crate in begining for best light

At first it looked like it ws just the one now I see your set up, the best bet what is do since u cut whole in the rubbermaid and didn't do it the other Wat is to get the top Rubbermaid and the bottom lid and hot glue and cut as much as you can to where it will still snap on an not look tampered with and line the inside with the reflective tape

Doesnt look tampered with from outside...fan is under milk crate blowin out small hole used for cords...will this setup work?

You will have to modify it as soon as they get bigger so may as well do it now make your whole between the rubbermaids as big ass possible but make sure they still fit right