lovenest420
Member
Okay, so from the beginning I started with the plan in a cup with a single 40w CFL. Got it up to about two weeks 8" tall, and transplanted to the pot. Now I'm getting some issues with the plant. Been doing 24hrs for past 3.5 weeks now. At first, I had a 200W huge curly style CFL I managed to find at Home Depot. It was at 2700K though, so I had to change from my sloppy setup. Left it that way for maybe 3-4 days with no fans. My current setup is one 250w FelizLight HighPower CFL 6500K on top, and four 20w fluorescent lights surrounding. Some aluminum foil around the sides to save some light, and 3 fans blowing some air around. Just hearing that this is not the best choice for a soil. I've got MiracleGrow moisture control potting soil, and tap water that sits for a few days before going into the pot. Been watering when the pot got fairly light... not trying to over-water. I didn't really know what to do when this curling and discoloring started happening. All I could make out was to maybe try a flush, so I watered until I got a decent bit of run-off. After the flush, its been 5 days since last water and the pot is still holding a good bit of water... Maybe adding so much water to flush is bad for the moisture-absorbent MG soil? Don't know, but so far no other issues besides the persistent curling and discoloring of my leaves. Working its way from the bottom to the top a little more each day. Whats happening? Should I just let it ride out and tough it out? Does this soil contain anything that could cause my plant to do this? Was it the few days of heat it had more than a week ago? Pics are current. Thanks for any help!













