First Bagseed, Bubble Ponic Grow

prole1982 · Sep 8, 2009

This is my 1st grow, some stats: Bag seed, 2 months old, 1 foot tall, 2 23 watt day CFL, 2 100 watt CFL soft. Currently Flowering, Miracle Grow Perilite and filtered water with a bubbler, no nutes. Pics are posted below in succession of age. Should I add nutes? Or is there enough in the perelite? I don't want to burn it. Constructive criticism is always welcome bongsmilie

prole1982 · Sep 9, 2009

My root system is quite large it seems (Pics above), should I switch to a larger pail? I am currently using one that holds 2.5 gallons of water. And if I do go larger, say 5 gallons should I get another bubbler?

tkjoe · Sep 9, 2009

wow dude, i wish i knew somethinga bout bubble ponics. but your plant looks awesome! i love the ghetto grows. check out my ghetto grow!! its interesting to see what i eat and how it affects my grow area

prole1982 · Sep 9, 2009

Thanks man, I'll check it out. I don't know what I'm doing I'm just stumbling through this high and this plant took off. Four others died during seedling stage, this one is strong though. I burnt it with the bulb twice and almost let the roots get dry. Another time the bubbler went off for 8 hours and I thought it drowned. I hope its a girl.

stumps · Sep 9, 2009

how are your roots? nice and white?

lepricon3 · Sep 9, 2009

Keep it up!

prole1982 · Sep 9, 2009

stumps said:
how are your roots? nice and white?

Yea they look real white, you can kind of tell in that picture but its low cam phone quality. They actually picked up the bubbler from the bottom of the pail and are holding it! I don't want to mess with it :joint:

stumps · Sep 10, 2009

Do you think you'll need a new bubbler under the root mass. also what are your temps I've been having rot issues. the higher temps worked great for clones but only about 5 or 6 days then slime set in.

prole1982 · Sep 10, 2009

stumps said:
Do you think you'll need a new bubbler under the root mass. also what are your temps I've been having rot issues. the higher temps worked great for clones but only about 5 or 6 days then slime set in.

Well to be honest I have no idea what my temp is. I keep my house temp between 80-82 F. I live in a very dry climate so mold is not an issue around here. I think I will get another bubbler it wont hurt when I switch it to a 5 gallon bucket. Do you think I have enough light on her?

stumps · Sep 10, 2009

I don't have much good to say about low watt cfl's. It looks like it's doing ok. I use 1 100w and 1-80w for veg and hps for flower. I would use mh for veg and hps for flower if I had a 600w hps. Just can't beat that combo for lighting. In the pic It looks like you could get your lights a bit closer to the plant. luck to you.

prole1982 · Sep 10, 2009

stumps said:
I don't have much good to say about low watt cfl's. It looks like it's doing ok. I use 1 100w and 1-80w for veg and hps for flower. I would use mh for veg and hps for flower if I had a 600w hps. Just can't beat that combo for lighting. In the pic It looks like you could get your lights a bit closer to the plant. luck to you.

Thanks for the advice man, today I'm rigging my setup again and will post pictures soon of my adaptations. bongsmilie

prole1982 · Oct 14, 2009

plant died please erase this thread thanks

prole1982 · Dec 14, 2010

Okay I lied I just got hell of paranoid after some sweeps in my town targeting closet growers near campus. At any rate here is the rest of the pics. I harvested a little over 3 oz of dried bud that hit heavy.

First Bagseed, Bubble Ponic Grow

prole1982

Member

Attachments

prole1982

Member

tkjoe

Active Member

prole1982

Member

stumps

Well-Known Member

lepricon3

Active Member

prole1982

Member

stumps

Well-Known Member

prole1982

Member

stumps

Well-Known Member

prole1982

Member

prole1982

Member

prole1982

Member

Similar threads