Electricity Question
- Thread starter chode79
- Start date
knotanother
Active Member
600w is about 5 amps
Solstice07
Well-Known Member
If I remember my Ohm's Law correctly, 15 amps would be around 1900 watts at 120V/60HZ.
Mcgician
Well-Known Member
Correct. Amps X Volts= Watts.
(for original poster)
Don't forget it. It's more important than you think. Many grow rooms have caught fire as a result of too much heat and bad wiring/circuitry. Be careful.
Solstice07
Well-Known Member
Holy crap, my old ass can still remember shit from high school. E=I/R
Here's an easier way to figure it out: http://ourworld.compuserve.com/homepages/Bill_Bowden/ohmslaw.htm
Here's an easier way to figure it out: http://ourworld.compuserve.com/homepages/Bill_Bowden/ohmslaw.htm
dutchfunkle
New Member
Dont forget voltage drop...15*110=1650W
WhatDoYouWantFromLife
Well-Known Member
Keep in mind you should NEVER go over 80% of your breakers limit. In your case it would be 12 amps MAX.
IslandGreenGuy
Well-Known Member
I just had two 30 amp circuit put in for my grow. It was the best thing I have done thus far. I would occationaly blow a breaker (is that the term) when I was using the 15amp circuit. I would be fine untill I was a really hot day and the AC would kick on and toss another 600 watts. Then all hell would break loose. Havent blown one yet since the change.
But yes 15amp would be fine for what you have. Although I would suggest using a 20 amp or better yet using 2 separet 15 amp circuits, one for the lights and one for the other crap you have up there.
But yes 15amp would be fine for what you have. Although I would suggest using a 20 amp or better yet using 2 separet 15 amp circuits, one for the lights and one for the other crap you have up there.
herbose
Well-Known Member
Blow works, trip is another term. I'm talking about lights here.
Similar threads
