Yo!!! I just got 4x of the BML SPYDR 1200 and I want to build an airtight sealed box so I can use CO2.... I can't just build out the entire room because the area this is going into is about 200' x 400' (this is all for testing purposes) so... if I go to home depot, what do I need to buy to accomplish this? I was thinking a bunch of 4' x 8' and then some of the clear 6 mil plastic sheeting... I'd like to be able to easily access 2 sides of the box which are across from each other since I'll be hand watering... that is where I'm stuck at... thoughts??? ideas??? I think once I have a solid design I'll be able to build this shit easily.... thanks dudes!!!!
easiest way to build either an 8' x 8' or a 4' x 16' sealed box ????
- Thread starter Imaulle
- Start date
toaster struedel
Well-Known Member
Just seal the door with weather stripping. You will be fine.
GREEN APPLE SPLATTERS
New Member
And for watering u could always install a drip line
bird mcbride
Well-Known Member
Go with a four foot flood and drain table. Line the interior with 4'x8'x1" corolite. Corolight looks a lot like styrofoam but is non-flamable. Corolite insulation sheets are mainly used in insulating concrete construction. In white it's great for light reflection and it's fireproof. Certain caulkings would be handy for sealing joints in the material. I prefer using a drill and deck, drywall screws etc for assembling. I would go 2"x4"'s every two feet on the framing to accomodate a door and just wrap it tightly in black/white plastic...white side out.
bird mcbride
Well-Known Member
You could even finish the exterior with cheap colored tarp. A bag of 2' fiberglass inso's pretty cheap also.
bird mcbride
Well-Known Member
Drywall for the interior is cheap and non-flamable but heavy and can get ruined if wet.
Mountainfarmer
Well-Known Member
use cheap metal exterior door for entry. After installing door, seal with great stuff insulations spray foam. The door will be airtight.
SPLFreak808
Well-Known Member
6 pieces of wood.
Brackets,door hinge,screws,wood glue,paint ect pretty easy to make a "box', just use weather seal as people say for the door.
As far as c02 you can just slap a bottle and reg in there or just build an external cab that can push into the grow room.
Brackets,door hinge,screws,wood glue,paint ect pretty easy to make a "box', just use weather seal as people say for the door.
As far as c02 you can just slap a bottle and reg in there or just build an external cab that can push into the grow room.
JackHererSki
Well-Known Member
I found a 5'x5'x7' mylar tent for 200 including shipping. Never used it but ive set up. Not bad. EBay is the way
Similar threads
- Locked
