Gimme The Spliffff
Active Member
Im going to start my new grow I had black buckets but I ruined them and I was wondering is the homedepot orange or white buckets ok to use? Like I stated I had the black ones but the stores around here dont have any and I would have to travel an hour to get them..
Present I have now there in smaller totes and I want to put them in the 5 gallon buckets.. Also I have 1/2 pvc pipe and I want to put a hole in the bucket to have a drain I have a 1/2 pvc pipe and a open/close fitting what size grommet do I order for 1/2 pvc.. I have the hydroform 1/2 grommet but those are too small.. I need to step up
So a little about my room.. Its a 7x10 area I have a quantum 600 ballast and also a 400 watt that I will soon upgrade to another 600watter.. The 400 watt will be used for the mother plant when I get that far.. The area is all sealed so I went ahead and purchased a hydrogen pro water cooled c02 generator.. I went and purchased the PPM meter they have also and the watervalve to turn the unit on and off also a cap photocell controller that will not let the c02 unit turn on when the lights are off and it wont vent the room till the light is on.. I also store a 55 gallon rezzi on the other side of the wall.. I was also wondering can I run my c02 without the cooling part for right now? or can I ruin the machine.. Its dead winter and i have no possiable water to run out there right now.. I know the room will heat up quick but the machine will run for 4/5 min every 2 hours or so..
I will be adding pics shortly once I get the room squared away.. any info will be helpful..lata peeps
Present I have now there in smaller totes and I want to put them in the 5 gallon buckets.. Also I have 1/2 pvc pipe and I want to put a hole in the bucket to have a drain I have a 1/2 pvc pipe and a open/close fitting what size grommet do I order for 1/2 pvc.. I have the hydroform 1/2 grommet but those are too small.. I need to step up
So a little about my room.. Its a 7x10 area I have a quantum 600 ballast and also a 400 watt that I will soon upgrade to another 600watter.. The 400 watt will be used for the mother plant when I get that far.. The area is all sealed so I went ahead and purchased a hydrogen pro water cooled c02 generator.. I went and purchased the PPM meter they have also and the watervalve to turn the unit on and off also a cap photocell controller that will not let the c02 unit turn on when the lights are off and it wont vent the room till the light is on.. I also store a 55 gallon rezzi on the other side of the wall.. I was also wondering can I run my c02 without the cooling part for right now? or can I ruin the machine.. Its dead winter and i have no possiable water to run out there right now.. I know the room will heat up quick but the machine will run for 4/5 min every 2 hours or so..
I will be adding pics shortly once I get the room squared away.. any info will be helpful..lata peeps
